上海格铁优势: 证书齐全，正规渠道，交易灵活，价格合理，质量优异，当天下订当当天发货。优点：可根据客户要求，为客户提供：原厂，出厂，材质报告，UL黄卡、等。

Valox 175 Unreinforced, neat PBT resin for compounding only. Natural Color Only.

Valox 175HP Unreinforced, neat FDA compliant PBT resin for compounding only.

Valox 176 Unreinforced, neat PBT resin for fibers. Natural Color Only.

Valox 176HP Unreinforced, FDA compliant neat PBT resin for fibers. Natural Color Only.

Valox 195 For compounding only (not for injection molding) Unreinforced PBT.

Valox 195HP For compounding only (not for injection molding) Unreinforced PBT.

Valox 215HPR Unreinforced PBT with mold release. FDA food contact compliant in limited colors.

Valox 295 Unreinforced PBT;Melt viscosity 900-1300 poise.

Valox 305 PBT, For compounding only. Not intended for Injection Molding.

Valox 308 PBT, For compounding only. Not intended for Injection Molding.

Valox 310 Unreinforced, general purpose. Typical viscosity 5000-7000.

Valox 310SE0 Unreinforced, flame retardant PBT. V0-0.7mm.

Valox 311 Unreinforced, improved resistance to UV. Medium viscosity.

Valox 312 Unreinforced, For compounding only (not for injection molding).

Valox 315 Unreinforced, For extrusion/compounding only (not for injection molding).

Valox 325 General purpose, unreinforced, improved processing.

Valox 337 Low temperature impact PBT.

Valox 357 PC/PBT, Impact Modifier, Flame Retardant

Valox 357U Unreinforced PBTP, UL94 V-0/5VA rated. Improved UV resistant version of VALOX 357.

Valox 364 Designed for outdoor telecommunications enclosure applications.

Valox 365 Unreinforced, opaque, provides chemical resistance and dimensional stability.

PBT在熔融状态下流动性好，粘度低，仅次于尼龙，在成型易发生“流延”现象。PBT成型制品各向异性。PBT在高温下遇水易降解。2 PBT的注塑：选用螺杆式注塑机时。应考虑如下几点。①制品的用料量应控制在注塑机额定大注射量的30％～80％。不宜用大注塑机生产小制品。②应选用渐变型三段螺杆，长径比为15～20，压缩比为2.5～3.0。③应选用自锁式喷嘴，并带有加热控温装置。④在成型阻燃级PBT时，注塑机的有关部件应经防腐处理。

3 PBT制品与模具设计①制品的厚度不宜太厚，PBT对缺口很敏感，因此，制品的直角等过渡处应采用圆弧连接。②未改性PBT的成型收缩率较大，在1.7％～2.3％，模具要有一定的脱模斜度。③模具需要设排气孔或排气槽。④浇口的口径要大。⑤模具需设置控温装置。模具高温度不能超过100℃。⑥阻燃级PBT成型，模具表面要镀铬，以防腐。