博琪供应PC嘉兴帝人L-1225L

博琪供应PC嘉兴帝人L-1225Y

博琪供应PC嘉兴帝人L-1225Z100

博琪供应PC嘉兴帝人L-1250Y

博琪供应PC嘉兴帝人L-1250Z100

博琪供应PC嘉兴帝人LN-2250Y

博琪供应PC嘉兴帝人LV-2225L

博琪供应PC嘉兴帝人LV-2225Y

博琪供应PC嘉兴帝人LV-2250Y

Chemical properties of PC plastic raw materials

PC has good mechanical properties, but poor flow characteristics, making the injection molding process of this material more difficult. When selecting PC materials of what quality, the final expectations of the product should be taken as the benchmark. If the plastic parts require high impact resistance, then use PC materials with low flow rates; On the contrary, PC materials with high flow rates can be used to optimize the injection molding process.

PC plastic raw material is a new type of thermoplastic, with a transparency of 90%, and is known as a transparent metal. It is rigid and has toughness, high impact strength, high dimensional stability, and a wide range of operating temperatures. It has good electrical insulation performance, heat resistance, and non-toxicity, and can be molded by injection or extrusion. PC plastic has excellent thermal properties and can be used for a long time between -100 ℃ and 130 ℃, with a embrittlement temperature below -100 ℃.

Although polycarbonate has poor resistance to cracking and drug resistance, is prone to hydrolysis at high temperatures, has poor compatibility with other resins, and has poor lubrication performance, it can be modified by adding other resins or inorganic fillers to achieve excellent performance.