现货PC/PBT基础创新塑料V3900WX-1001 耐温高刚性低翘曲
SABIC Innovative Plastics Valox? V3900WX PBT+PC
Polymer,Thermoplastic,Polycarbonate (PC),Polycarbonate/Polybutylene Terephthalate (PBT) Blend, Unreinforced,Polyester, TP,Polybutylene Terephthalate (PBT)SABIC Innovative Plastics (GE Plastics)产品说明:PBT/PC blend - Unreinforced - Flame Retardant. This is a UV-stabilized grade designed for outdoor enclosure applications requiring UL 746C F1 weatherability performance.
SABIC Innovative Plastics Valox? V3900WX PBT+PC 物性表
| 比重 | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
| 密度 | 1.30 g/cc | 0.0470 lb/in3 | ISO 1183 |
| 水分吸收 | 0.0300 % | 0.0300 % | 23°C / 50% RH; ISO 62 |
| 饱和吸水率 | 0.10 % | 0.10 % | ISO 62 |
| 线性成型收缩率,Flow | 0.0070 - 0.010 cm/cm @Thickness 3.20 mm | 0.0070 - 0.010 in/in @Thickness 0.126 in | SABIC Method |
| 熔体流动速率 | 11 g/10 min @Load 2.16 kg, Temperature 265 °C | 11 g/10 min @Load 4.76 lb, Temperature 509 °F | ASTM D1238 |
| 化合物熔体指数 | 9.0 g/10 min @Load 2.16 kg, Temperature 265 °C | 9.0 g/10 min @Load 4.76 lb, Temperature 509 °F | MVR [cm^3/10 min]; ISO 1133 |
| 抗张强度(断裂) | 40.0 MPa | 5800 psi | 50 mm/min; ISO 527 |
| 43.0 MPa | 6240 psi | Type I, 50 mm/min; ASTM D638 | |
| 抗张强度(屈服) | 48.0 MPa | 6960 psi | SABIC - Japan Method |
| 51.0 MPa | 7400 psi | 50 mm/min; ISO 527 | |
| 53.0 MPa | 7690 psi | Type I, 50 mm/min; ASTM D638 | |
| 伸长率 (断裂) | 42 % | 42 % | 50 mm/min; ISO 527 |
| 50 % | 50 % | Type I, 50 mm/min; ASTM D638 | |
| 250 % | 250 % | SABIC - Japan Method | |
| 屈服伸长率 | 4.0 % | 4.0 % | 50 mm/min; ISO 527 |
| 5.0 % | 5.0 % | Type I, 50 mm/min; ASTM D638 | |
| 拉伸模量 | 2.09 GPa | 303 ksi | 1 mm/min; ISO 527 |
| 2.20 GPa | 319 ksi | 5 mm/min; ASTM D638 | |
| 弯曲强度 | 73.0 MPa | 10600 psi | 2 mm/min; ISO 178 |
| 80.0 MPa | 11600 psi | 1.3 mm/min, 50 mm span; ASTM D790 | |
| 弯曲模量 | 2.13 GPa | 309 ksi | 2 mm/min; ISO 178 |
| 2.20 GPa | 319 ksi | 1.3 mm/min, 50 mm span; ASTM D790 | |
| 悬壁梁缺口冲击强度 | 8.00 J/cm | 15.0 ft-lb/in | ASTM D256 |
| 1.10 J/cm @Temperature -30.0 °C | 2.06 ft-lb/in @Temperature -22.0 °F | ASTM D256 | |
| 41.0 kJ/m2 | 19.5 ft-lb/in2 | 80*10*4; ISO 180/1A | |
| 8.00 kJ/m2 @Temperature -30.0 °C | 3.81 ft-lb/in2 @Temperature -22.0 °F | 80*10*4; ISO 180/1A | |
| 简支梁缺口冲击强度 | 5.20 J/cm2 | 24.7 ft-lb/in2 | Edgew 80*10*4 sp=62mm; ISO 179/1eA |
| Dart Drop, Total Energy | 50.0 J @Temperature 23.0 °C | 36.9 ft-lb @Temperature 73.4 °F | ASTM D3763 |
| 50.0 J @Temperature -40.0 °C | 36.9 ft-lb @Temperature -40.0 °F | ASTM D3763 |
| 表面电阻 | 6.02e+16 ohm | 6.02e+16 ohm | ASTM D257 |
| 耗散因数 | 0.0199 @Frequency 1.00e+6 Hz | 0.0199 @Frequency 1.00e+6 Hz | ASTM D150 |
| 线形热膨胀系数 - 流动 | 88.4 μm/m-°C @Temperature -40.0 - 40.0 °C | 49.1 μin/in-°F @Temperature -40.0 - 104 °F | ASTM E 831 |
| 88.4 μm/m-°C @Temperature -40.0 - 40.0 °C | ISO 11359-2 | ||
| 线性热膨胀系数,横向流动 | 89.7 μm/m-°C @Temperature -40.0 - 40.0 °C | 49.8 μin/in-°F @Temperature -40.0 - 104 °F | ASTM E 831 |
| 89.7 μm/m-°C @Temperature -40.0 - 40.0 °C | ISO 11359-2 | ||
| 载荷下热变形温度(0.46 MPa) | 119 °C @Thickness 6.40 mm | 246 °F @Thickness 0.252 in | unannealed; ASTM D648 |
| 载荷下热变形温度(1.8 MPa) | 77.0 °C | 171 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 75.0 °C @Thickness 3.20 mm | 167 °F @Thickness 0.126 in | unannealed; ASTM D648 | |
| 96.0 °C @Thickness 6.40 mm | 205 °F @Thickness 0.252 in | unannealed; ASTM D648 | |
| 维卡软化温度 | 105 °C | 221 °F | Rate B/50; ASTM D1525 |
| 121 °C | 250 °F | Rate B/50; ISO 306 | |
| 123 °C | 253 °F | Rate B/120; ISO 306 | |
| UL RTI | 120 °C | 248 °F | UL 746B |
| UL RTI，机械冲击 | 120 °C | 248 °F | UL 746B |
| UL RTI，机械无冲击 | 120 °C | 248 °F | UL 746B |
| 可燃性(UL94) | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | UL 94 |
| 5VA @Thickness 3.00 mm | 5VA @Thickness 0.118 in | UL 94 | |
| 灼热丝试验 | 725 °C | 1340 °F | IEC 60695-2-13 |
| 825 °C | 1520 °F | IEC 60695-2-13 | |
| 960 °C @Thickness 1.00 mm | 1760 °F @Thickness 0.0394 in | IEC 60695-2-12 | |
| 960 °C @Thickness 3.00 mm | 1760 °F @Thickness 0.118 in | IEC 60695-2-12 |
| Ball Pressure Test, 125?°C +/- 2?°C | PASSES | IEC 60695-10-2 |
| UV-light, water exposure/immersion | F1 | UL 746C |