Generic Name: 全氟烷氧基 (PFA) - 提供方: DAIKIN INDUSTRIES, Ltd.

NEOFLON PFA AP-201 is a high flowability fluororesin.
It is suitable for injection molding of complicated shape products and extrusion molding of thin wall electric wire.

Introduction

AP-201 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.

Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.

Suitable for injection molding of complicated shape products and extrusion molding of thin-walled electric wires.

Excellent chemical resistance which is not affected by most of the chemicals.

It retains flexibility without losing toughness under the environment from cryogenic to high temperature.

Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.

It shows high electrical resistance and dielectric strength.

Nonflammable like POLYFLON PTFE and NEOFLON FEP.

Excellent weather resistance. No properties change even when exposed outside for a long time.

Non-stickiness. It shows excellent releasability and water repellency / oil repellency.

 与典型值比较 - Upgrade to compare!

单位: SI