Sumipex通用级可分为两个基本类别:良好的流动性和耐热性。每个等级都有颗粒形式。有些等级有珠型 SUMIPEX general-purpose grades can belassified into two basic categories: good flow and heat resistant lypes. Each grade is avalable in pellet form. Bead form is available for some grades

SUMIPEX PMMA住友化学 

PMMA工艺条件:干爆处理:PMMA具有吸湿性因此加工前的干爆处理是必须的建议干煤条件为80-90°C、2~4小时熔化温度:240~270°C

模具温度:35~70°C

注射速度:中等。