R530 PA66美国奧升德（首诺）---R530H is general-purpose, heat-stabilized, hydrolysis-resistant, 30% glass-fiber reinforced PA66 resin. Available in natural, it is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is also lubricated for improved machine feed and flow.

Glass-reinforced Vydyne resins provide higher heat distortion temperature, resistance to creep and better dimensional stability when compared with unreinforced PA66. These products have good chemical resistance to a broad range of chemicals including gasoline, hydraulic fluids and most solvents.

Vydyne R530H is heat-stabilized to minimize oxidative degradation of the polymer when exposed to elevated temperatures in service. This product provides improved retention of physical properties under exposure to long-term heat. Also, Vydyne R530H has excellent knit-line strength and fatigue resistance, which is essential for cycle testing with anti-freeze solutions.

Typical Applications/End Uses:

Vydyne R530H has been used for several under-the-hood automotive applications. The hydrolysis-resistant properties make it an excellent candidate for radiator end tank and heater core applications.

注射 干燥 单位制

干燥温度 80.0 °C

干燥时间 4.0 hr

建议的 大回制料比例 25 %

料筒后部温度 280 到 310 °C

料筒中部温度 280 到 310 °C

料筒前部温度 280 到 310 °C

射嘴温度 280 到 310 °C

加工（熔体）温度 285 到 305 °C

模具温度 65.0 到 95.0 °C