MAGNUM™ 275

ABS Resin

Trinseo

产品说明：

MAGNUM™ 275 ABS resin is a low gloss, low flow ABS resin with good impact. MAGNUM ABS resins are thermoplastic materials that provide an excellent balance of processability, impact resistance, and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resins are available in a wide range of melt flow rates, impact strengths, and heat resistances for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion, and thermoforming. MAGNUM ABS resins offer a wide range of processing abilities and impact resistance for low gloss injection molding applications. Combined with heat resistance, tensile and flexural strength, MAGNUM ABS resins are used in a wide variety of injection molding applications.

Applications

Injection molding applications

Extrusion and thermoforming applications

Complies with:

U.S. FDA 21 CFR 181.32

Consult the regulations for complete details.

物性信息：

基本信息
黄卡编号

E54680-101898222

特性

光泽，低

抗撞击性，良好

可加工性，良好

流动性低

耐热性，高

机构评级

FDA 21 CFR 181.32

形式

粒子

加工方法

挤出

热成型

注射成型

物理性能额定值单位制测试方法比重


    --1.04g/cm³ASTM D792    --1050kg/m³ISO 1183 1熔流率（熔体流动速率） (230°C/3.8 kg)2.6g/10 minASTM D1238熔体体积流动速率 (220°C/10.0 kg)9.00cm³/10minISO 1133 2收缩率 - 流动0.40 到 0.70%ASTM D955机械性能额定值单位制测试方法拉伸模量


    -- 31830MPaASTM D638    --2000MPaISO 527-2 4抗张强度


    屈服 537.2MPaASTM D638    屈服44.0MPaISO 527-2 6    断裂 734.5MPaASTM D638伸长率


    屈服 83.0%ASTM D638    屈服2.6%ISO 527-2 9    断裂 10****ASTM D638断裂伸长率30%ISO 527-2 11弯曲模量 122030MPaASTM D790弯曲强度 1363.4MPaASTM D790冲击性能额定值单位制测试方法简支梁缺口冲击强度

ISO 179/1eA 14    -30°C9.00kJ/m²ISO 179/1eA    23°C22.0kJ/m²ISO 179/1eA简支梁冲击强度

ISO 179/1eU 15    -30°C无断裂
ISO 179/1eU    23°C无断裂
ISO 179/1eU悬壁梁缺口冲击强度 16

ASTM D256    -18°C, 3.20 mm130J/mASTM D256    23°C, 3.20 mm270J/mASTM D256装有测量仪表的落镖冲击

ASTM D3763    -18°C, Peak Energy32.8JASTM D3763    -18°C, 3.20 mm, Total Energy 1737.3JASTM D3763    23°C, Peak Energy32.8JASTM D3763    23°C, 3.20 mm, Total Energy 1846.3JASTM D3763热性能额定值单位制测试方法载荷下热变形温度


    0.45 MPa, 未退火, 3.20 mm93.3°CASTM D648    0.45 MPa95.0°CISO 75-2 19    1.8 MPa, 未退火, 3.20 mm79.4°CASTM D648    1.8 MPa85.0°CISO 75-2 20维卡软化温度


    --107°CASTM D1525    50°C/h, B (50N)99.0°CISO 306 21线形膨胀系数 - 流动7.9E-5cm/cm/°CISO 11359-2 22可燃性额定值
测试方法UL 阻燃等级 23(1.52 mm)HB
UL 94燃烧性能 正常厚度 1.6mm (1.47 mm, UL)HB
ISO 1210 24备注1 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???2 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???3 .1000 mm/min4 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???5 .类型 1, 51 mm/min6 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???7 .类型 1, 51 mm/min8 .类型 1, 51 mm/min9 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???10 .类型 1, 51 mm/min11 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???12 .类型 1, 2000 mm/min13 .类型 1, 2000 mm/min14 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???15 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???16 .0.25 mm 缺口深度17 .3.39 m/sec18 .3.39 m/sec19 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???20 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???21 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???22 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???23 .这个额定值并非为了反映这种或任何其他材料在实际起火条件下造成的危险。24 .??????,?? ISO 10350 ??? 23°C/50%r.h. ???