| 适用范围 : | 压线 | 重量 : | 1Kg |
| 型号 : | 47387 | 品牌 : | AMP |
| 名称 : | 压线钳 | 加工定制 : | 否 |
TYCO AMP航空压接工具、，压接线端子、端子压接尺寸1.25-2.0（16-14）0.6-1.5（20-16）连接器均为原装，美国进口代理价格最低。
Tyco压接工具，AMP安普压线钳，AMP压PIN钳，AMP压制工具，TYCO安普网线钳,AMP压线工具，安普打线工具, AMP端子连接工具价格，AMP航空压接工具价格最低，TYCO AMP HAND TOOL, TYCO AMP TERMINALS，DAHT Double Action Hand Tool深圳湾边贸易美国代理进口价格优惠！
现货AMP工具
91577-1
91529-1
91522-1
91500-1
91558-1
AMP 47387航空及军事用压嘴工具，资料如下，
CERTI-CRIMP II SAHT
Fixed dies
Straight action jaw closure
Ratchet mechanism ensures complete crimp cycle
Emergency only ratchet release
Terminal/wire positioning aids & Ins. adjustment on most tools
Ergonomic non-slip handles
Approximate weight 0.59 kg (1.3 lbs)
Standard Straight Action Hand Tool Design
Widely used in the Aircraft and Military industries
---------------------
Tyco压接工具，AMP安普压线钳，AMP压PIN钳，AMP压制工具，TYCO安普网线钳,AMP压线工具，安普打线工具, TYCO AMP HAND TOOL, TYCO AMP TERMINALS
DAHT Double Action Hand Tool
46121,47907-1,45160,45449,45575-1,45450,58489,59270,69959,576780,576789,576791,576782,576783,576784,69363,49935,45592,47386,47387
CERTI-CRIMP II
1901600-1, 1901611-1 ,91505-1,91503-1,91520-1,91517-1,91516-1,91533-1,91531-1,91518-1,91551-1,91515-1,91516-1,91512-1,91506-1,91510-1,91508-1,91506-1,91536-0,91529-1,91522-1,91594-1,91526-1,91515-1,91519-1 91503-1 ,91558-1 ,91560-1 ,91500-1 ,91521-1
SDE Premium Crimp Toolin
58433-1,58433-2,318450-1,318452-1,318451-1,58531-2,58531-1,58531-3,58433-2,58501-1,58506-3,58500-1,58499-1,58558-1,58559-1,58621-1,58622-1,58663-1
Hydraulic Equipment
69120-2,69120-1,59907-7,1804700-1,1804700-2,59974-1,59975-1,59973-1,1890748-1,1890749-1,69055,69099,69051,69066,58422-1,47820,47821,57822,47823,47824,4782547915,47918,58422-1,
305183 Extraction Tools
91285-1 INSERT/EXTRACT TOOL ASSEMBLY
169404 CERTI-LOK DIE
1-1579007-6 Extraction Tools
--------------------
深圳湾边贸易
91572-1 AMP CT 2.0 Receptacle 0.12 - 0.4 (26-22)
91576-1 AMP DYNAMIC D-2 0.08 - 0.22 (28-24)
91595-1 AMP DYNAMIC D-2 0.4 - 1.0 (22-18)
91558-1 AMP DYNAMIC D-3 0.6 - 1.5 (20-16)
91559-1 AMP DYNAMIC D-3 0.2 - 0.6 (24-20)
91503-1 AMPLIMITE HD-20 0.08 - 0.6 (28-20)
Ins. Ø0.76-1.52mm
91513-1 AMPLIMITE HD-20 0.4 - 1.0 (22-18)
91548-1 AMPLIMITE HD-20 0.08 - 0.6 (28-20)
91549-1 AMPLIMITE HD-20 0.08 - 0.22 (28-24)
Ins. Ø0.76-1.52mm
91520-1 AMPLIMITE HD-22 0.08 - 0.4 (28-22)
Ins. Ø0.76-1.27mm
91537-1 AMPMODU II FFC 0.15 - 0.4 (26-22)
91516-1 AMPMODU IV 0.05 - 0.6 (30-20)
91517-1 AMPMODU IV, V 0.15 - 0.4 (26-22)
Ins. Ø1.02-1.52mm
91512-1 Commercial MATE-N-LOK 0.2 - 1.0 (24-18)
Ins. Ø1.52-2.54mm
91501-1 Micro MATE-N-LOK 0.2 - 0.6 (24-20)
Ins. Ø0.89-1.53mm
91502-1 Micro MATE-N-LOK 0.05 - 0.12 (30-26)
Ins. Ø0.89-1.53mm
91522-1 Mini-Universal MATE-N-LOK 0.4 - 1.0 (22-18)
Ins. Ø1.5-2.39mm
91529-1 Mini-Universal MATE-N-LOK 0.15 - 0.4 (26-22)
Ins. Ø1.19-1.75mm
91536-1 Mini-Universal MATE-N-LOK "F" Ins. Crimp 0.5 - 1.42 (22-16)
Ins. Ø2.0-3.2mm
91594-1 Mini-Universal MATE-N-LOK "O/L" Ins. Crimp 0.5 - 1.42 (22-16)
Ins. Ø2.0-3.2mm
91577-1 MULTILOCK 040 0.4 - 0.6 (22-20)
91505-1 TYPE III+ 0.2 - 1.42 (24-16)
深圳湾边贸易
1901600-2 PIDG STRATO-THERM 1.0 - 1.5 (18-16)
1901611-2 PIDG STRATO-THERM 0.2 - 0.6 (24-20)
1901600-1 PIDG STRATO-THERM 1.0 - 1.5 (18-16)
1901611-1 PIDG STRATO-THERM 0.2 - 0.6 (24-20)
1213805-[ ] Battery Tool Kit
1213860-[ ] Adapter, Electric Terminator
1-1901600-2 PIDG STRATO-THERM 1.0 - 1.5 (18-16)
1-1901611-1 PIDG STRATO-THERM 0.2 - 0.6 (24-20)
Example 91500-1 CERTI-CRIMP II SAHT; handles can be
1213805-2 - Kit only without Head
1213805-5 - Kit only without Head (GB Power Plug)
Image representative of type only
1213860-1 - Adapter only
45216 PIDG Closed End Splice 1.0 - 1.5 (18-16)
90009-8 Special GB Railways PIDG FASTON Tool
Qualifications: LUL RSE 024 pt6 & EE6161
1.5 - 2.5 (16-14)
90035-3 Special GB Railways PIDG FASTON Tool
Qualifications: LUL RSE 024 pt6 & EE6161
0.4 - 1.0 (22-18)
482930-1 Special French tool for PIDG FASTON 2.8 (.110) with crimp orientation at 90°
Marks the applied product with a one dot indent code.
0.15 - 0.4 (26-22)
46121 Standard Tool for PIDG; PLASTI-GRIP Butt Splices
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Marks the applied product with a one dot indent code
0.15 - 0.4 (26-22)
47386 Standard Tool for PIDG & PLASTI-GRIP Terminals and PIDG Splices - GB Railways
Qualifications: Mil-T-7928/7; LUL RSE 024 pt6 & EE6161
Marks the applied product with a one dot indent code.
0.4 - 1.5 (22-16)
Ins. Ø3.18mm max
47386-5 French PIDG & PLASTI-GRIP Ring Tongue Tool - includes French Instuction Sheet
Meets Mil-T-7928 - AMP specified level
Marks the applied product with a one dot indent code.
0.4 - 1.5 (22-16)
47387 Standard Tool for PIDG & PLASTI-GRIP Terminals and Splices - GB Railways
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Marks the applied product with a two dot indent code.
1.25 - 2.0 (16-14)
0.6 - 1.5 (20-16) HD
Ins. Ø3.8mm1 max
525690 Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.
Equivalent to 47386 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
0.6 - 1.0 (20-18)
525691 Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.
Equivalent to 47387 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
1.5 - 2.5 (16-14)
47386-4 GB Special for PIDG & PLASTI-GRIP Ring Tongue's & FASTON's
Meets Mil-T-7928 - AMP specified level for Ringtongues only
Marks the applied product with a one dot indent code.
0.4 - 1.5 (22-16)
47387-7 GB Special for PIDG & PLASTI-GRIP Ring Tongue's and FASTON's:
Meets Mil-T-7928 - AMP specified level for Ring Tongues only
Marks the applied product with a two dot indent code.
1.5 - 2.5 (16-14)
0.6 - 1.5 (20-16) HD
46447 SOLISTRAND High Temp Terminals and Splices 0.4 - 6.0 (22-10)
49592 Standard Tool for SOLISTRAND
Qualifications: Mil-T-7928
2.5 - 4.0 (14-12)
49935 Standard Tool for SOLISTRAND Terminals and Splices
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
0.4 - 6.0 (22-10)
69363 Standard tool for SOLISTRAND
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
0.15 - 0.6 (26-20)
525693 Special tool for SOLISTRAND (GB)
Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161
Equivalent to 49935 but has special retaining pins/rings to reduce the risk of tool
parts falling off whilst building and maintaining aircraft.
0.4 - 6.0 (22-10)
46673 STRATO-THERM Uninsulated 0.4 - 1.5 (22-16)
46673-1 STRATO-THERM Uninsulated without Insulation Support 0.4 - 1.5 (22-16)
Example 47386 DAHT; handles can be removed and the head
used with this kit.
Over 100 crimps per charge
Compact - only 360mm (14") long and weighs 1.57kg (3.48lbs)
The Tool Kit is supplied in a durable plastic carry case and
includes:
Battery Tool with the relevant DAHT Adapter
Battery Charger 230 v
Two Batteries
for more information, please see the Power Assist section
Convert your existing Hand Tools into Powered!
1213804-2 - Kit only without Head
1213804-5 - Kit only without Head (GB Power Plug)
Hand held power unit 189721-1
or
Foot actuated Power Unit 189722-1
for more information, please see the Power Assist section
.
1213563-1 - Adapter only
深圳湾边贸易
69710-1 - Base Tool without Die-set
Widely used in Aircraft and Military applications
1901260-1 Base Tool without Die-set
A light duty alternative to 69710-1
深圳湾边贸易
Open Head 1213840-[ ]
Closed Head 1213819-[ ]
Adapters for C-Head Dies:
Electric Terminator 1901556-1
Press SSC- 2FP 8-1481221-3
A range of Die-sets for many premium crimp applications
58212-1 AMPLIMITE RG 142, 142A, 142B
576711 PIDG STRATO-THERM 0.2 - 0.4 (24-22)
576714 PIDG STRATO-THERM 1.5 (16)
576715 PIDG STRATO-THERM 1.0 (18)
576720 PIDG STRATO-THERM 0.5 (22)
47807-1 PIDG, PLASTI-GRIP 1.5 - 2.5 (16-14)
47806-2 PIDG, PLASTI-GRIP, 0.4 - 1.5 (22-16)
1-539634-9 Pin 50 ohm, size 8 kit Gore Cable Type:
GSC-03-81748-00
Hand Tool Frame 69710-1
Adapters for C-Head Dies:
Electric Terminator 1901556-1
Press SSC- 2FP 8-1481221-3
59993-1 AMPLIMITE 8 (10)
576716 PIDG STRATO-THERM 2.5 (14)
576723 PIDG STRATO-THERM
576742 PIDG STRATO-THERM 4.0 (12)
69735 PIDG STRATO-THERM 4.0 - 6.0 (12-10)
47808-6 PIDG, PLASTI-GRIP 4.0 - 6.0 (12-10)
90140-1 TYPE XII Contact 6.0 - 10.0 (10-8)
90145-1 TYPE XII Contact 2.5 - 4.0 (14-12)
58380-1 Universal MATE-N-LOK 3.0 (12)
58380-2 Universal MATE-N-LOK 5.0 (10)
深圳湾边贸易
General Hand Tool Types Revised: July 2008
C-Head SAHT Battery Tool Kit
1213819-2 - CLOSED head
1213819-5 - CLOSED head (GB Power Plug)
1213840-2 - OPEN head
1213840-5 - OPEN head (GB Power Plug)
深圳湾边贸易
234170-1 AMP DYNAMIC D-5 1.5 - 2.5 (16-14)
234171-1 AMP DYNAMIC D-5 4.0 - 6.0 (12-10)
1366044-1 AMP DYNAMIC D-5 Receptacle 8.0 (10)
90246-1 Standard tool for PIDG FASTON 2.5 - 4.0 (14-12)
90276-2 Special GB Railways PIDG FASTON Tool
Qualifications: LUL RSE 024 pt6 & EE6161
484364-1 PIDG STRATO-THERM 1.0 (18)
59287-2 PIDG, PLASTI-GRIP Large Expansion 4.0 - 6.0 (12-10)
525692 Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.
69322-1 SOLISTRAND High Temp Parallel Splice 0.4 - 6.0 (22-10)
69355 SOLISTRAND 10.0 (8)
59461 STRATO-THERM Uninsulated with Insulation Support 4.0 - 6.0 (12-10)
(16-14) HD
90382-2 TYPE XII Contact 1.5 - 4.0 (16-12)
90384-1 TYPE XII Contact 6.0 - 10.0 (10-8)
深圳湾边贸易
1901235-2 - Kit only without head
1901235-5 - Kit only without head (GB Power Plug)
the Handles from 59239-4 can be removed and the head used
Hand held power unit 189721-1
or Foot actuated Power Unit 189722-1
525432-1 - Adapter only
深圳湾边贸易
169400 Base Tool without Die-set
656075-1 Complete tool for LOCKING CLIP 0.03 - 0.56 (32-20)
169404 Die-set for PIDG, PLASTI-GRIP
Use in Hand Tool Frame 169400
GB Railways PIDG & PLASTI-GRIP Tool (Signal only)
Meets; Mil-T 7928 F, VG 88720, DIN 41611
0.6 - 6.0 (20-10)
169409 Die-set for SOLISTRAND
深圳湾边贸易
169424-1 AMPLIMITE HD-20 0.08 - 0.56 (28-20)
Ins. Ø0.76-1.52mm
734643-1 AMPLIVAR
734203-1 AMPMODU IV 0.12 - 0.14 (26)
734204-1 AMPMODU IV 0.2 -0.56 (24-20)
734870-1 MICRO MATCH COSI contact 0.2 - 0.6 (24-20)
734870-2 MICRO MATCH COSI contact 0.08 - 0.2 (28-24)
539608-1 MODU II 0.02 - 0.20 (32-24)
734216-1 TYPE III+ 0.2 - 1.5 (24-16)
Ins. Ø1.1-2.5mm
539717-1 - Base Tool without Die-set
1579000-1 - Base Tool without Die-set Long Handles Image representative of type only
Part Number Description mm2 (AWG) or other
1579002-6 PIDG STRATO-THERM 0.2 - 0.4 (24-22)
1579002-7 PIDG STRATO-THERM 1.0 - 2.5 (18-14)
7-1579001-2 POSITIVE-LOK 0.35 - 0.75 (24-18)
7-1579001-3 POSITIVE-LOK 0.5 - 0.75 (22-20)
7-1579001-4 Die-set for Ring Tongue (similar to DIN 46225) 1.0 - 2.5 (18-14)
深圳湾边贸易
9-1579004-6 MCON 2.8 Receptacle 0.2 - 0.35 (24-22)
Ins. Ø1.15-1.4mm
9-1579004-8 MCON 2.8 Receptacle 1.5 - 2.5 (16-14)
Ins. Ø2.2-3.0mm
9-1579004-9 MCON 2.8 Receptacle 4.0 (12)
Hand Tool Frame 539635-1
1285003-1 - Head for the 626 Pneumatic System
1579000-7 - Adapter for Bench Top Press SSC- 2FP (1481004-7)
4-1579001-1 AMP MCP 1.2-LL 1.0 - 1.5 (18-16)
4-1579001-2 AMP MCP 1.2-LL 0.5 - 0.75 (22-20)
4-1579001-3 AMP MCP 1.2-LL 0.25 - 0.35 (24-22)
4-1579001-4 AMP MCP 1.2-LL 0.14 - 0.22 (26-24)
4-1579001-5 AMP MCP 1.2-LL (SWS) 1.0 - 1.5 (18-16)
4-1579001-6 AMP MCP 1.2-LL (SWS) 0.75 - 1.0 (20-16)
4-1579001-7 AMP MCP 1.2-LL (SWS) 0.2 - 0.35 (24-22)
4-1579001-8 AMP MCP 1.2-LL (SWS) 0.14 - 0.22 (26-24)
- 人气
- 323
- 发布时间
- 2022-05-20 15:55
- 所属行业
- 其他类型钳工工具
- 编号
- 10902539