GENERAL DEscriptION
The SGM5347-10 features 8 channels of 10-bit digitalto- analog converter (DAC) with output amplifiers. Theoutput amplifier provides high current drive capability. The digital data is input via a serial link bus. only three control lines are required, and cascaded connections can be used. The SGM5347-10 provides daisy-chain capability, which can update multiple SGM5347-10s simultaneously by using a single serial interface.
The SGM5347-10 is available in Green SOIC-16 and TSSOP-16 packages. It operates over an ambient temperature range of -40℃ to +125℃.
FEATURES
Low Power Consumption (0.5mW/CH)
Integrating 8 Channels of 10-Bit DAC
Build-In Analog Output Amplifier: Sink/Source Current with Short Current Control
Daisy-Chain Operation
8 Channels Outputs Update Simultaneously
Independent Channel Power-Down Function
0.6μA (TYP) ICC for Power-Down Mode
The Range of D/A Conversion can be Independently Set by Separating the Power Supply for MCU Interface and Operational Amplifier and the Power Supply for DAC
Capable of Being Controlled Directly by a 3V MCU
Power-On Reset: Output Reset to GND
Serial Data Input: Up to 2.5MHz Operation
Power Supply Voltage Range: 2.8V to 5.5V
Available in Green SOIC-16 and TSSOP-16 Packages