GENERAL DEscriptION
The SGM31324 is a 3-channel, current-regulated RGB LED driver with an I2C-compatible interface. It is well suited for various applications powered by a 1-cell Li-Ion or Li-Polymer, or systems with 3.3V or 5V supply voltages, as well as 3-cell NiCd, NiMH or Alkaline batteries. No external components are required for the three constant current sinks.
With two programmable timers, users can adjust LED blinking time and get the result of fade-in and fade-out for unique color lighting.
Programmable I2C interface allows independent channel control for LED ON or OFF state and LED brightness due to 10 internal registers and an internal decoder. Each current sink can be independently configured with 192-step current levels from 0.125mA to 24mA. The SGM31324 provides less than 1μA shutdown current.
An automatic blink mode allows the LED on D1 pin (LED1) ON/OFF automatically at an 8mA load every 2 seconds after the EN pin is pulled high.
The SGM31324 is available in a Green UTDFN- 1.5×1.5-8L package. It operates over an ambient temperature range of -40℃ to +85℃.
FEATURES
Input Voltage Range: 2.5V to 5.5V
Ultra-Low 30mV Dropout Voltage at a 10mA Load per String
Programmable LED Current through I2C Interface
0.125mA to 24mA Current Levels with 0.125mA Steps
Automatic Blink Mode on D1 Pin
Maximum LED1 Current: 8mA
Blinking Period: 2s
Independent Channel Control
ON/OFF State Interval Time Control
RGB LED Color Control
Programmable Ramp-Up and Ramp-Down Time
No Noise and Constant LED Current
Fast and Smooth Startup
Less than 1μA Shutdown Current
-40℃ to +85℃ Operating Temperature Range
Available in a Green UTDFN-1.5×1.5-8L Package
APPLICATIONS
Multi-Color LEDs
RGB Indicator LEDs
Impact LED Signs and Displays
Handheld Equipment