SE301 is an USB Type-C controller (USB Type-CTM
Specification 1.1) with/without intermal PMOS FET. It
specially designed for power adapter and charger
applications (*up to 3A @5V). It can provide the
information about the power source current rating to a
load device. It also prevents the VBUS from being
asserted unless a valid connection has been
detected. SE301是-款带智能识别功能的USB
Type-C DFP CC控制器芯片。芯片支持USB
Type-C V1. 1端口协议的连接检测、正反插识.
别、广播DFP设备电流能力配置等，只有在适
配器(DFP)检测到有UFP插入之后才开启
VBUS供电，当UFP拔出后，会自动关闭
VBUS。
广泛应用于车充、旅充、墙充、移动电源
等。
CC1/CC2 Pin to Advertise Power Source
Current rating to UFP Device
Three DFP CC Termination Current Source
Levels Auailable
--80UA for Default USB Power Application
--180uA for 1.5A@5V Application-
- -300uA for 3A@5V Application
P_MOS VBUS Switch Control Pin ( SE301 )
Build in intemal P-MOS ( SE302)
VDD Operating Range 3.0V-5.5V
2KV HBM ESD Protection
应用
USB Type-C Power Ports for Mobile Chargers
AC-DC Adapters
Power Adapters
Car Charger