GENERAL DEscriptION
The SGM11124E is a single-pole/four-throw (SP4T) antenna switch, which supports from 0.1GHz to 3GHz. The device features low insertion loss and high isolation, which make it suitable for high linearity receiving and 2G/3G/4G transmitting/receiving (TRx) applications. It also has the advantage of high linearity performance. The SGM11124E is not subject to cellular interference and is applied to multi-mode and multi-band LTE mobile phones.
The SGM11124E has the ability to integrate SP4T RF switch and GPIO controller on an SOI chip. Internal driver and decoder for switch control signals are offered by the GPIO controller, which makes it flexible in RF path band and routing selection.
No external DC blocking capacitors required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost.
The SGM11124E is available in a Green ULGA-1.1×1.1-9L package.
FEATURES
Supply Voltage Range: 2.5V to 3.4V
GPIO Controller
Low Insertion Loss: 0.62dB (TYP) at 2.7GHz
Operating Frequency Range: 0.1GHz to 3GHz
High Isolation: 18dB (MIN) at 2.7GHz
Advanced Silicon-On-Insulator (SOI) Process
No External DC Blocking Capacitors Required
Available in a Green ULGA-1.1×1.1-9L Package
APPLICATIONS
Receiving Band Switching and Pre-PA Switching
2G/3G/4G Transmitting/Receiving (TRx)