GENERAL DEscriptION
The SGM11103F is a single-pole/triple-throw (SP3T) antenna switch, which supports from 0.1GHz to 6GHz. The device features low insertion loss and high isolation, which makes it suitable for high linearity receiving application. It also has the advantage of high linearity performance. The SGM11103F is not subject to cellular interference and is applied to multi-mode and multi-band LTE mobile phones.
The SGM11103F has the ability to integrate SP3T RF switch and GPIO controller on an SOI chip. Internal driver and decoder for switch control signals are offered by the GPIO controller, which makes it flexible in RF path band and routing selection.
No external DC blocking capacitors required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost.
The SGM11103F is available in a Green UTQFN-1.1×1.1-9L package.
FEATURES
Supply Voltage Range: 2.4V to 3V
GPIO Controller
Operating Frequency Range: 0.1GHz to 6GHz
Low Insertion Loss: 0.5dB (TYP) at 2.7GHz
High Isolation: 20dB (MIN) at 2.7GHz
Advanced Silicon-On-Insulator (SOI) Process
No External DC Blocking Capacitors Required
Available in a Green UTQFN-1.1×1.1-9L Package
APPLICATIONS
3G/4G/5G Rx and Diversity Applications