GENERAL DEscriptION
The SGM61180 is an efficient, 8A, synchronous Buck converter with integrated power MOSFETs and a wide 4.5V to 18V input range. This current mode control device is optimized for high density applications with minimal number of external components. High switching frequency, up to 2000kHz, can be chosen to lessen the solution size by smaller inductor and capacitors. This device can be used as a standalone or tracking power supply. The SS/TR pin can be used to control the output voltage startup ramp or as an input for tracking.
Power supply sequencing for two or more power supplies is possible by using the enable input (EN) and the open-drain power good output (PG) signals.
The high-side MOSFET current is cycle-by-cycle limited for overload protection. The low-side MOSFET sourcing current is also limited to prevent current runaway. The low-side switch also has a sinking current limit that turns it off if an excessive reverse current flows through it.
Thermal shutdown protection is activated to prevent damage to the device when the junction temperature is above the shutdown threshold.
The SGM61180 is available in a Green TQFN-3.5×3.5-14L package.
FEATURES
Low Integrated RDSON Switches: 24mΩ/15mΩ
Split Rails for Supply (VIN) and Power (PVIN)
1.8V to 18V Range for PVIN
4.5V to 18V Range for VIN
200kHz to 2000kHz Switching Frequency
External Clock Synchronization
Voltage Tracking Capability
0.6V Internal Reference Voltage
±1% Reference Voltage Accuracy
3.4μA (TYP) Shutdown Current
Hiccup Mode Current Limit
Monotonic Startup with Pre-biased Outputs
Adjustable Soft-Start Time
Power Sequencing Capability
Power Good Output Monitor for Under-Voltage and Over-Voltage Protections
Adjustable Input Under-Voltage Lockout (UVLO)
-40℃ to +125℃ Operating Temperature Range
Available in a Green TQFN-3.5×3.5-14L Package
APPLICATIONS
Industrial and Commercial Power Systems
Distributed Power Systems
Server and Storage
Communications Equipment