GENERAL DEscriptION
The SGM41102/SGM41102A is designed for primary protection of Li-Ion/polymer rechargeable cells. The product integrates all the protections required for safe operation of polymer rechargeable cells. The device is packaged in a tiny and thin package. Its small solution size leaves more space for fitting the battery cell into a given cavity for small size wearable devices.
The SGM41102/SGM41102A integrates all the protections and the required low on-resistance disconnect switch on one die. The protection features include charge and discharge protection, detection and protection of a cell in over-charge, over-discharge, over-current, and battery under-voltage. The product also disconnects the battery pack in the case of deep discharge.
The SGM41102/SGM41102A operates in -40℃ to +85℃ temperature range, and is in a thin and low profile UTDFN-1.5×2-6L package. This package with a nominal height of 0.5mm is convenient for small cell packing designs.
FEATURES
Ultra-Compact Protection Solution
Pass Resistance: 43mΩ (TYP)
Operation Current: 1.8μA (TYP)
Factory Programmable OVP Threshold Options
4.20V to 4.575V with 0.025V per Step
Over-Charge/Discharge Current Protection
4 Thresholds Combination Options
Over-Discharge Current Protection Selection
One Time Latch when OCD Trigger
Battery Under-Voltage Protection
2.6V/2.7V/2.8V/3.0V Options
50nA Deep Discharge Shutdown
0V Battery Charging
Input Surge Clamping
Input Over-Voltage Safe
Load Short-Circuit Safe
Reverse Polarity Battery Safe
Input Reversed-Attaching Safe
Battery Pack Paralleling Safe
Locked-Off for Delivery/Assembly
Available in a Green UTDFN-1.5×2-6L Package
APPLICATIONS
IoT Gadgets
Wearable Devices
Battery Packs