品牌 : | SKF斯凯孚 | 品牌 : | SKF |
产品型号 : | PHL FM10/400 | 测量精度 : | 精细 |
结构型式 : | 垂直结构 | 显示方式 : | 液晶显示屏 |
外行尺寸 : | 1*1*1 |
(SKF皮带张力计PHL FM10/400)特价进口
供应SKF轴承安装工具TMFT36,SKF注油器套件729101B, SKF注油器套件729101E
SKF注油器226400,300和400兆帕,SKF轴承拆装工具 SKF锁定螺母KM5-KM15全系列
供应SKF轴承组合工具TMMK10-35, SKF装拆轴承组合工具套件TMMK10-35
不正确的皮带张力易造成:轴承损坏、皮带跳动及过热、减短皮带及机件寿命、能源耗损。
skf红外线皮带张力计由手持数位量测计及光学感测器组成,以光学感应方式量测皮带震动频率,适用於时规皮带、三角皮带以及动力传送皮带等各种工业用皮带,帮助您快速、可靠、的量测皮带张力。
特点:
● 测量皮带张力
● 快速、可靠的量测数据
● 排除人為误差
● 使用简单方便
● 非接触式测量
● 不受环境及噪音影响量测品质
上海现货销售中心,德国舍佛勒FAG润滑脂,瑞典SKF轴承,SKF润滑脂及SKF维护工具,价格优势明显,质量保证,欢迎咨询。
谢生:157-2159-5057
电话:021-56489917-8006
Q号:264-3096-627
SKF Belt Frequency Meter
PHL FM 10/400
The most ac c urate belt tension
measurement method
Correct belt tension is crucial for the whole
drive system, its service life and the service
life of associated c o mponents such as
bearings and seals . Therefore, it is important
to get ac c urate and reliable results when
measuring belt tension .
The SKF Belt Frequency Meter is one
of the most ac c urate tools available for
measuring belt tension. Readings are quick,
reliable and, most importantly, repeatable .
The tool is extremely easy to use and minimizes the risk of errors.
Wide range of applications
The SKF Belt Frequency Meter consists of a
hand-held meter and an optical sensor, to
provide contact-free belt tension measurements for most of the following belt types,
even in a nosiy environment:
• V-belts (wrapped, cogged raw edge,
ribbed)
• Banded V-belts
• Timing belts
The SKF Belt Frequency Meter is capable
of measuring belt vibration frequencies from
10 to 400 Hz. Based upon the measured
belt frequency, the SKF Belt Frequency
Meter calculates belt tensions up to 9 900 N
(2 200 lbs.).
Belt tools
Easy and quick to use
• Simply key-in the span length and mass
data . Data can also be saved and recalled
for repeated use, if necessary .
• Aim sensor at centre of selected belt span
and pluck or tap the belt .
• The display will show the measured
frequency which can be toggled to either
newton or pound force values .
• Readjust the belt tension, if necessary,
and take another measurement