HP B180L工作站
整机参数
HP B180L HP Visualize b180L：180MHZ/256MB/9GB
A4190-66528 HP B180L MOTHERBOARD
0950-3021 HP B180L 200W POWEWR SUPPLY
A4200-66545 HP B CLASS 100MHZ 512KB CACHE MEMORY
A3830-60001 HP 128MB ECC MEMORY MODULE HP B132L B180L
A4190-66523 HP B Class B180 5 Volt Backplane Board With Eisa
82350-66501 HP agilent E2078A 82350A PCI-GPIB卡
E1489-66511 HP E1489-66511 PCA MXI CONTROLLER
备件详情
CPU
B132L: PA-7300LC 132 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)
B132L+: PA-7300LC 132 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)
B160L: PA-7300LC 160 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)
B180L+: PA-7300LC 180 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)
Chipset
LASI ASIC, which features:
NCR 53C710 8-bit single-ended SCSI-2
Intel 82596CA 10 Mbit Ethernet controller
WD 16C522 compatible parallel
Harmony CD/DAT quality 16-bit stereo audio
NS 16550A compatible serial
Wax chip
EISA bus converter (GSC-to-EISA)
Second RS232 serial
Dino GSC-to-PCI bridge
Phantom PseudoBC GSC+ port
Visualize-EG (Graffiti) graphics
Intel 82503 Ethernet transceiver, media auto-selection
CS4215 or AD1849 programmable CODECs
WD37C65C Floppy controller
B132L, B160L: NCR 53C720 16-bit Fast-Wide high-voltage differential (HVD) SCSI-2
B132L+, B180L+: Symbios Logic 53C875 16-bit Ultra-Wide SCSI-2 controller
B132L+, B180L+: DEC 21142/43 (Tulip) Fast-Ethernet controller
Buses
GSC general system-level I/O bus
B132L (both): 33 MHz 132 MB/s
B160L: 40 MHz 160 MB/s
B180L+: 36 MHz 144 MB/s
EISA additional expansion I/O bus
PCI-32/33 high-performance device I/O bus
SCSI-2 Fast-Narrow single-ended bus
B132L, B160L: SCSI-2 Fast-Wide high-voltage differential main storage I/O bus
B132L+, B180L+: SCSI-2 Ultra-Wide single-ended main storage I/O bus
Memory
72-pin ECC SIMMs, 60ns or faster
Takes 16-256 MB modules (latest firmware-rev needed)
Six slots
32 MB (2×16) minimum, 1.5 GB (6×256) maximum
Expansion
B132L, B160L:
One slot for either a GSC (EISA formfactor) or PCI 32-bit/33 MHz, 3.3 V card
One slot for either a GSC (EISA formfactor), PCI 32-bit/33 MHz, 3.3 V or EISA card
B132L+, B180L+:
One slot for either a GSC (EISA formfactor) or PCI 32-bit/33 MHz, 5 V card
One slot for either a GSC (EISA formfactor), PCI 32-bit/33 MHz, 5 V or EISA card
I/O slot layout (from top to bottom):
PCI-32/33 or GSC
PCI-32/33 or EISA or GSC
Drives
One tray for a 68-pin half-height 3.5″ SCSI hard drive, either Fast-Wide high-voltage differential (B132L, B160L) or Ultra-Wide SE (+-models)
One tray for a 3.5″ Floppy drive
One tray for a 50-pin half-heigth 5.25″ Fast-Narrow 50-pin SE SCSI drive, external accessible, can also accomodate a hard drive.
External connectors
50-pin HD SCSI-2 Fast-Narrow single-ended
B132L, B160L: 68-pin HD SCSI-2 Fast-Wide high-voltage differential
B132L+, B180L+: 68-pin HD SCSI-3 Ultra-Wide single-ended
Two DB9 male RS232C serial
DB25 female parallel
B132L, B160L: TP/RJ45 10 Mbit Ethernet
B132L+, B180L+: TP/RJ45 10/100 Mbit Ethernet
15-pin AUI 10 Mbit Ethernet
EVC graphics port1
Two PS/2 connectors for keyboard & mouse
Four phone jacks (microphone, headphones, line-in and line-out)