pbq全系列产品pbq general purpose series系列，pbq high rate series系列，pbq long life series系列，pbq gel series系列，pbq front access series系列，pbq single cell series系列，pbq lifepo4 series系列，pbq cyclic series系列，pbq primary lithium series系列，PBQ电池提供广泛的产品系列，以满足客户和潜在客户的要求。PBQ电池包括特殊的VdS认证的电池，循环（深度放电）电池，高倍率电池，单块和前访问模式。除了广泛密封铅酸蓄电池， PBQ还提供锂电池。小型便携式锂电池被提供在所有三个主要化学成分：锂 - 亚硫酰氯，锂锰和锂二氧化硫。我们的研发部门现在还增加了一个新的PBQ磷酸铁锂的γ发展 - PBQ磷酸铁锂电池 。PBQ电池专注于EMEA（欧洲，中东和非洲）市场。在这一地区的发展对于 PBQ电池异常重要。
产品优点：
1、免补水、维护简单
采用特殊设计克服了电池在充电过程中电解失水的现象，电池在使用过程中电液体积和比重几乎没有变化，因此电池在使用寿命期间完全无需补水，维护简单。
2、密封安全、安装简单
电池内没有流动的电液，电池立式、侧卧安装使用均可，无电液渗漏之患，而且在正常充电过程中电池不会产生酸雾。因此可将电池安装在办公室或配套设备房内，而无需另建专用电池房，降低工程造价。
3、使用寿命长
采用了耐腐性良好的铅钙合金板栅，在25℃的环境温度下，正常浮充寿命可达10年以上。
4、高功率放电性能好
采用了内阻值很小的优质极板和玻纤隔板，而且装配较紧，使得电池内阻极小。在-40℃~60℃温度范围内进行大电流放电，其输出功率比常规电池可高出15%左右。
5、安装使用方便
电池出厂时已经完全充电，用户拿到电池后即可安装投入使用。
性能特点：
以气相二氧化硅和多种添加剂制成的硅凝胶，其结构为三维多孔网状结构，可将硫酸吸附在凝胶中，同时凝胶中的毛细裂缝为正极析出的氧到达负极建立起通道，从而实现密封反应效率的建立，使电池全密封、无电解液的溢出和酸雾的析出，对环境和设备无污染。
胶体电池电解质呈凝胶状态，不流动、无泄露，可立式或卧式摆放。
板栅结构：极耳中位及底角错位式设计，2V系列正极板底部包有塑料保护膜，可提高蓄电池在工作中的可靠性，合金采用铅钙锡铝合金，负极板析氢电位高。正板合金为高锡低钙合金，其组织结构晶粒细小致密，耐腐蚀性能好，电池具有长使用寿命的特点。
隔板采用进口的胶体电池专用波纹式PVC隔板，其隔板孔率大，电阻低。
电池槽、盖为ABS材料，并采用环氧树脂封合，确保无泄露。
极柱采用纯铅材质，耐腐蚀性能好，极柱与电池盖采用压环结构即压环与密封胶圈将电池极柱实现机械密封，再用树脂封合剂粘合，确保了其密封可靠性。
2V、12V全系列电池均具备滤气防爆片装置，电池外部遇到明火无引爆，并将析出气体进行过滤，使其对环境无污染。
PBQ general purpose series, PBQ high rate series, PBQ long life series, PBQ gel series, PBQ front access series, PBQ single cell series, PBQ LiFePO4 series, PBQ cycle series, PBQ primary literature Series, PBQ batteries provide a wide range of products to meet the needs of customers and potential customers. PBQ batteries include special VDS certified batteries, cycle (deep discharge) batteries, high magnification batteries, single block and front access modes. In addition to widely sealed lead-acid batteries, PBQ also provides lithium batteries. Small portable lithium batteries are offered in all three main chemical ingredients: lithium thionyl chloride, lithium manganese and lithium sulfur dioxide. Our R & D department has also added a new PBQ lithium iron phosphate battery for γ - development. PBQ batteries focus on the EMEA (Europe, Middle East and Africa) market. The development in this area is very important for PBQ batteries. Although we are the United States, Australia, Hong Kong,
Product advantages:
1. Water free and simple maintenance
The special design overcomes the phenomenon of electrolytic water loss in the charging process of the battery. The volume and specific gravity of the battery hardly change in the use process. Therefore, the battery does not need water supplement during its service life, and the maintenance is simple.
2. Safe sealing and simple installation
There is no flowing electro-hydraulic fluid in the battery. The battery can be installed and used vertically or horizontally. There is no leakage of electro-hydraulic fluid, and the battery will not produce acid mist in the normal charging process. Therefore, the battery can be installed in the office or supporting equipment room, without the need to build a special battery room, reducing the project cost.
3. Long service life
The lead calcium alloy grid with good corrosion resistance is used, and the normal floating life can be more than 10 years at 25 ℃.
4. High power discharge performance
High quality electrode plate and glass fiber partition plate with small internal resistance value are used, and the assembly is tight, so that the internal resistance of the battery is very small. In the range of - 40 ℃ ~ 60 ℃, the output power of high current discharge is about 15% higher than that of conventional battery.
5. Easy to install and use
The battery has been fully charged when leaving the factory, and can be installed and put into use after the user gets the battery.