INFUSE™ 9100 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed. INFUSE 9100 exhibits very good processability in various extrusion processes. INFUSE 9100 also provides high filler loading capability along with low compression set over a wide temperature range.
Main Characteristics
High upper service temperature performance
Highly flexible with good elastic recovery
Fast set up times for processability
General purpose elastomer
Excellent for compounds and blends
Complies with
EU, No 10/2011
U.S. FDA FCN 424 Consult the regulations for complete details.
INFUSE™ 9100 物性表
| 机构评级 | FDA FCN 424 欧洲 No 10/2011 |
| 形式 | 粒子 |
| 比重 | 0.877 | g/cm³ | ASTM D792 |
| 熔流率（熔体流动速率） (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| 肖氏硬度 (邵氏 A, 模压成型) | 75 | ASTM D2240 |
| 拉伸模量 - 100 正割 (模压成型) | 2.79 | MPa | ASTM D638 |
| 抗张强度 (断裂, 模压成型) | 6.60 | MPa | ASTM D638 |
| 伸长率 (断裂, 模压成型) | 480 | % | ASTM D638 |
| 弯曲模量 - 2% 正割 (模压成型) | 19.1 | MPa | ASTM D790 |
| 抗张强度 (断裂) | 13.0 | MPa | ASTM D412 |
| 伸长率 (断裂) | 1300 | % | ASTM D412 |
| 撕裂强度 | 40.0 | kN/m | ASTM D624 |
| 压缩变形 | ASTM D395 | ||
| 21°C | 19 | % | ASTM D395 |
| 70°C | 47 | % | ASTM D395 |
| 溶融温度（DSC） | 120 | °C | 内部方法 |
| TMA 1(1.00 mm) | 114 | °C | 内部方法 |
| 1 . | 1N，5°C/分 |
