K-329T | | E2209T1-1/4 | | - | | - | | K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless steels.The principal area of application is chemical plant and shipbuilding as well as nuclear plant industries. |
|
|
K-347T | | E347T1-1 | | YF347C | | YF347C | | K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels. |
|
|
K-409TiT | | E**09 | | - | | - | | K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode. |
|
|
K-410T | | E410T0-1/-4 | | YF 410C | | YF 410C | | K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450∑ |
|
|
K-410NiMoT | | E410NiMoT0-4 | | - | | - | | K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types. |
|
|
K-430T | | E430T0-G | | YF430G | | YF430G | | K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, |
|
|
K-436T | | - | | - | | - | | K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, |
|
|
K-439T | | - | | - | | - | | K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti types.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, |
|
|
K-309LF | | E309LT0 -1/-4 | | YF309LC | | YF309LC | | K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500Nbo |
|
|
K-316LF | | E316LT0-1/-4 | | YF316LC | | YF316LC | | K-316LF is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel.bo |
|