PHASE无框交流力矩电机由定子和转子（磁铁）组成，通过其直接驱动电机实现了机床工业和其它领域同时对高精度和高转矩的需求,以同步电机方式运行的力矩电机非常适合于旋转轴和回转工作台,因此，力矩电机从原理上排除了机械传动误差，能显著减少安装空间，减少摩擦系数，能实现更高的精度和动态性能。
Standard part catalogue
电机型号 大转矩 额定堵转转矩 额定电流 额定速度 定子外径 转子内径 定子长度 转子惯量
Nm Nm Arms Rpm mm mm mm Kgm2
TK85-50-01 7.97 5.15 5.4 6000 85 44 82 0.3×10-3
TK85-100-01 18.21 12 12.57 6000 85 44 132 0.6×10-3
TK85-140-01 28.18 19 19.91 6000 85 44 172 0.84×10-3
TK106-45-01 10 6.8 6.36 5140 106 65 83 0.8×10-3
TK106-90-01 24 16 14.96 5140 106 65 128 1.45×10-3
TK106-180-01 47 33 30.85 5140 106 65 218 2.7×10-3
TK164-60-04 54 37 12.46 1655 164 96 102 4.3×10-3
TK164-110-03 114 80 27.62 1655 164 96 152 7.3×10-3
TK164-250-09 302 209 24.74 500 164 96 292 16×10-3
TK170-60-0.6 40 32 51.72 8200 170 65 145 5×10-3
TK170-112-0.6 74 63 101.83 8000 170 65 197 8×10-3
TK200-80-06 70 13 680 200 80 4X10-3
TK240-60-04 117 96 23.06 1130 240 150 108 20×10-3
TK240-140-04 273 226 54.07 1087 240 150 178 37×10-3
TK240-240-04 575 477 114.45 997 240 150 278 60×10-3
TK270-40-07 122 95 13.71 634 270 180 78 21×10-3
TK270-80-08 305 254 31.36 496 270 180 118 38×10-3
TK270-120-12 484 382 32.42 326 270 180 158 53×10-3
TK370-70-25 555 507 20.75 140 370 280 108 111×10-3
TK370-140-35 1093 861 26.03 100 370 280 178 186×10-3
TK370-210-45 1915 1600 36.83 70 370 280 248 311×10-3
TK450-60-40 660 585 14.69 83 450 340 98 170×10-3
TK450-120-40 1508 1407 35.41 78 450 340 158 309×10-3
TK450-240-40 3279 3057 76.77 76 450 340 278 586×10-3
TK570-100-65 2135 1800 29.01 53 570 480 148 790×10-3
TK570-200-65 4554 3740 63.14 56 570 480 248 1420×10-3
TK570-300-65 6944 5670 108.70 67 570 480 348 2050×10-3
电机型号 大转矩 额定转矩 额定电流 额定速度 定子外径 转子内径 定子长度 转子惯量
General technical information on TK frameless motors
The TK series of frameless brushless motors provide the highest torque density available today for direct drive, high performance applications. Unlike traditional torque motrs, TK units have both high torque and high speed capability and thus operate seamlessly both as spindle and table motors.
TK motors consist of separately supplied stator and rotor units suitable for direct assembly inside the structure of the machine. TK motors are three phase, rare earth (Iron Neodymium Boron) permanent magnet units and reach the highest continuous and peak torque density available today, together with high speed and flux control ability over a constant power range up to 10:1.
The rotors use special Phase manufactured magnets with minimized loss factor allowing high speed operation with a thin isotropic rotor.
All rotors are rigid units with mechanical, glue free magnet retention, preloaded carbon fiber sleeve for safe operation even at very high speed.
Rotor are often semi custom units to allow direct coupling to bearings, encoders, brakes.
All TK motors are designed for fluid (water) cooling on the outside of the stator for maximum performance. Conduction/convection cooling is also possible. Constant power operation (flux control) always requires water cooling.
Customized frames with integral cooling or even partial machine subassemblies with bearings and encoders are manufactured on request based on the standard frameless magnetic designs available.
The torque range spans from 10 to 40,000 Nm with maximum diameter 1150mm; above that size, segmented semi custom units are available, currently up to 18 m diameter
APPLICATIONS
metal cutting:
• DD rotary tables with both contouring and turning ability
• DD spindles for mills and lathes
• Tubular spindle motors for multi spindle machines
• Rotary table indexing for transfer machines
metal forming:
• DD fl