PA66的应用范围：
1.汽车工业:汽车工业为PA的大市场，主要用于发动机部件、电气配件、车体部件及输油件等。具体产品有：输油管、空调管、喷油嘴、油箱、燃料过滤器、储油槽、罐、齿轮、车轮盖及汽车外饰板等。
2.机械工业:可广泛制造齿轮、蜗轮、垫片、螺栓、螺母、轴承等。
3.电子/电器:主要用于民用电器如电饭锅、吸尘器、微波炉等的开关、接线板、电阻器等。
PA66 德国巴斯夫 A3EG7 高强度13%玻纤机械零
PA66 德国巴斯夫 A3EG6轴承保持架PA66机械配 PA66 德国巴斯夫 A3EG5玻纤增强PA66注塑外壳 PA66 德国巴斯夫 A3EG3 玻纤15%高刚性pa增韧
PA66 德国巴斯夫 A3EG10机械部件护罩PA66增强
流道和浇口:由于PA66的凝固时间很短，因此浇口的位置非常重要。浇口孔径不要小于0.5*t
（这里t为塑件厚度）。
制成增强尼龙以提高刚性，降低蠕变性，并使制品的成型收缩率变小、尺寸稳定性变好。
能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀，但易容于苯、甲酸等极性溶剂。具有优良的耐磨性、自润滑性，机械强度较高。但吸水性较大，因而尺寸稳定性较差。
The application range of PA66:
1. Automotive Industry: The automotive industry is a major market for PA, mainly used for engine components, electrical accessories, vehicle body components, and fuel delivery components. The specific products include: oil pipes, air conditioning pipes, fuel injectors, fuel tanks, fuel filters, oil storage tanks, tanks, gears, wheel covers, and car exterior panels.
2. Mechanical industry: It can widely manufacture gears, worm gears, gaskets, bolts, nuts, bearings, etc.
3. Electronics/Electrical Appliances: Mainly used for switches, wiring boards, resistors, etc. in household appliances such as rice cookers, vacuum cleaners, microwave ovens, etc.
PA66 German BASF A3EG7 high-strength 13% fiberglass mechanical zero
PA66 BASF A3EG6 bearing cage PA66 mechanical parts PA66 BASF A3EG5 glass fiber reinforced PA66 injection molded shell PA66 BASF A3EG3 glass fiber 15% high rigidity PA toughening
PA66 German BASF A3EG10 mechanical component cover PA66 enhancement
Runner and gate: Due to the short solidification time of PA66, the position of the gate is very important. The gate aperture should not be less than 0.5 * t
(Here t is the thickness of the plastic part).
Made of reinforced nylon to improve rigidity, reduce creep, and reduce the molding shrinkage and dimensional stability of the product.
It can withstand corrosion from acids, alkalis, most inorganic saline solutions, haloalkanes, hydrocarbons, esters, ketones, etc., but is easily tolerant to polar solvents such as benzene and formic acid. It has excellent wear resistance, self-lubrication, and high mechanical strength. However, due to its high water absorption, its dimensional stability is poor.
