TRANS-TEK传感器330全系列型号:0330-0000,0331-0000,0332-0000,0333-0000,0334-0000,0335-0000,0336-0000,0337-0000
Series 3303/8 Inch AC Gaging LVDTs
The Series 330 3/8″ AC Gaging LVDTs provide precise linear displacement sensing in a compact, spring loaded package. Advanced coil winding techniques are employed to minimize package length and optimize overall performance. Spring forces have been carefully selected to insure the proper balance of mechanical frequency response and tip force. Available in strokes ranging from ± 0.005″ to ± 1.0″, these sensors are ideally suited to material thickness measurements, single or multi-point surface profiling, creep testing, or any other application re the use of a small, spring loaded LVDT. These transducers are also an excellent replacement for a standard dial indicator.
KEY FEATURES
Ranges from ±0.005” to ±1.0”
Self-Lubricating Bearing
Non-linearity ≤ 0.20%
20 MicroInch Repeatability
SPECIFICATIONS - ELECTRICAL (Reference frequency 7.0 KHz)
MODELUNITS0330-00000331-00000332-00000333-00000334-00000335-00000336-00000337-0000LINEAR RANGE±Inches±(mm)0.005
(0.13)0.01
(0.26)0.025
(0.64)0.05
(1.27)0.1
(2.54)0.25
(6.35)0.5
(12.7)1.0
(25.4)NON LINEARITY
< ±0.25% Max.< ±0.20% Max.OVERTRAVEL
OUTPUT MonOTONIC OVER ENTIRE MECHANICAL TRAVELTEMPERATURE RANGE-4°F to +176°F (-20°C to +80°C) (OPERATING) -65 °F to +176°F (-54°C to +80°C) (STORAGE)TEMP. COEFFICIENTSZERO: < ±0.001% Linear Range/°F SENSITIVITY: < ±0.01% /°FSENSITIVITYV/in./V ±10%44444210.5PHASE ANGLE°55555000INPUT IMPEDANCEOhms260255250245480320300355INPUT RESISTANCEOhms DC3636363660223040OUTPUT RESISTANCEOhms DC135135135135205210170185NULL VOLTAGE% V Ex. Max.0.20.250.30.40.8111MAXIMUM EXCITATION15 VRMS
SPECIFICATIONS - MECHANICAL
MODELUNITS0330-00000331-00000332-00000333-00000334-00000335-00000336-00000337-0000TOTAL LENGTH AInches (mm)2.45 (62.2)2.45 (62.2)2.45 (62.2)2.45 (62.2)2.93 (74.4)5.35 (136)6.86 (174)10.45 (265)SHAFT EXTENSION BInches (mm)0.65 (16.5)0.65 (16.5)0.65 (16.5)0.65 (16.5)0.83 (21.1)1.22 (30.9)1.69 (42.9)2.60 (66.0)NULL POSITION CInches (mm)0.1 (2.54)0.1 (2.54)0.1 (2.54)0.1 (2.54)0.15 (3.81)0.35 (8.89)0.57 (14.5)1.15 (29.2)SPRING FORCE @ NULLLbs.0.730.730.730.731.070.740.570.70FREQ. RESPONSEHz25018011075451866DIMENSIonAL DRAWING
SCHEMATIC
ACCESSORIES
PART NUMBERDEscriptIONA002-0041Adapter for alternate contact tips: 5-60 Thread to 4-48 UNF-2B ThreadG000-0000Contact Tip, AGD #7G000-0008Contact Tip, .30″ Spherical O.D.; 5-60 Internal Threads. (Included with transducer)DC-DC OPERATION WITH OPTIonAL OSCILLATOR/DEMODULATOR
To facilitate prototyping, or in instances where the preference is a DC in – DC out system, any of the standard or High Temperature Series 330 can be used in conjunction with the Model 1000- 0014 Oscillator/Demodulator. Designed to work together, the DC system gives the same level of performance as provided by the AC LVDT alone. The high level DC output voltage can be directly interfaced with analog circuits as well as data ac cards, PLCs, or A/D converters. Provisions for customizing the Model 1000-0014 to provide zero offsets and nonstandard gains allow a simple and cost effective method of tailoring a system to meet individual customer re
SYSTEM SPECIFICATIONS (Combined Performance of LVDT and 1000-0014)
MODELUNITS0330-00000331-00000332-00000333-00000334-00000335-00000336-00000337-0000SIGNAL OUTPUT±VDC0.20.41.02.04.05.05.05.0OUTPUT CURRENT±3 mA without distortionOUTPUT RIPPLEVRMS0.0040.0080.020.030.030.030.030.03POWER INPUT
±14.5 to ±28 VDC @ ±100 mA Max., Input polarity protectedTEMPERATURE RANGE1000-0014+32 °F to +158°F (0°C to +70°C ) (Operating) -65 °F to +257°F (-54 °C to +125°C ) (Storage)TEMP. COEFFICIENTS1000-0014Zero < ±0.00035 VDC/°F Sensitivity < ±0.02%/°F