可选的推进器
这个配件可安装在TH钳夹上，机器人电动抓手，用推进力F在钳夹打开时保持负载。例如，卡盘夹紧设备时载重。
This accessory can be installed in the TH grippers，机器人抓手公司， to hold thepayload during the gripper release，江西机器人抓手， by a pushing force F.
As an example， when the chuck of a machining equipment isloaded.
双钳口自动对准平行i气动钳夹 (PE系列)
? 双动作(PE-25和PE-45可按要求单动作)。
? 高i性能，机器人抓手厂家，高可靠性。
? 不同行程的多种选择。
? 在整个行程中，夹紧力是不变的。
? 合金结构实现它的轻重量。
? FDA-H1 食品级润滑脂。
2-jaw parallel self-centering pneumatic gripper
(series PE)
? Double acting (single acting upon request for PE-25...
and PE-45...).
? High efficiency and reliability due to the lack of driving parts.
? Wide choice of stroke length options.
? The gripping force is constant on both directions along total
stroke.
? Light weight; due to its alloy construction.
? FDA-H1 food-grade grease.
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
机器人电动抓手-江西机器人抓手-吉玛泰克自动化工程由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司位于江苏省常熟市古里镇通华路1号2幢。在市场经济的浪潮中拼博和发展，目前吉玛泰克在气动工具中享有良好的声誉。吉玛泰克取得全网商盟认证，标志着我们的服务和管理水平达到了一个新的高度。吉玛泰克全体员工愿与各界有识之士共同发展，共创美好未来。