PC日本住友化学301-06
PC日本住友化学301-10
PC日本住友化学301-15
PC日本住友化学301-22
PC日本住友化学301-22
PC日本住友化学301-30
PC日本住友化学301-4
PC日本住友化学301-40
PC日本住友化学301V-10
PC日本住友化学302-4
PC日本住友化学303-06
PC日本住友化学303-10
PC日本住友化学303-15
PC日本住友化学303-22
PC日本住友化学875-20
PC日本住友化学FD5021H
PC日本住友化学IR5131V
PC日本住友化学LD-2050M
PC日本住友化学LR8031V
PC日本住友化学SD2201W
PC日本住友化学ST5131V
PC日本住友化学ST5301L
PC日本住友化学ST5301V
PC日本住友化学TR1501A
PC日本住友化学TR1501A
PC has good mechanical properties, but poor flow characteristics, making the injection molding process of this material more difficult. When selecting PC materials of what quality, the final expectations of the product should be taken as the benchmark. If the plastic parts require high impact resistance, then use PC materials with low flow rates; On the contrary, PC materials with high flow rates can be used to optimize the injection molding process.
PC plastic raw material is a new type of thermoplastic, with a transparency of 90%, and is known as a transparent metal. It is rigid and has toughness, high impact strength, high dimensional stability, and a wide range of operating temperatures. It has good electrical insulation performance, heat resistance, and non-toxicity, and can be molded by injection or extrusion. PC plastic has excellent thermal properties and can be used for a long time between -100 ℃ and 130 ℃, with a embrittlement temperature below -100 ℃.
Although polycarbonate has poor resistance to cracking and drug resistance, is prone to hydrolysis at high temperatures, has poor compatibility with other resins, and has poor lubrication performance, it can be modified by adding other resins or inorganic fillers to achieve excellent performance.