PBT 美国杜邦 FGS600F40

FGS600F40 NC010 物性表物理性能额定值 (公制)额定值 (英制)测试方法密度1.11 g/cc0.0401 lb/in31.31 g/cc0.0473 lb/in3ISO 1183吸水率0.40 %@Thickness 2.00 mm0.40 %@Thickness 0.0787 inSim. to ISO 62水分吸收0.200 %@Thickness 2.00 mm0.200 %@Thickness 0.0787 inSim. to ISO 62粘度测试120 cm3/g120 cm3/gISO 307 1157 1628线性成型收缩率,Flow0.019 cm/cm0.019 in/inISO 294-4 2577线性成型收缩率，横向0.018 cm/cm0.018 in/inISO 294-4 2577熔体流动速率33 g/10 min@Load 2.16 kg, Temperature 250 °C33 g/10 min@Load 4.76 lb, Temperature 482 °FISO 1133机械性能额定值 (公制)额定值 (英制)测试方法抗张强度(屈服)58.0 MPa8410 psiISO 527-1/-2伸长率 (断裂)30 %30 %Nominal; ISO 527-1/-2屈服伸长率6.0 %6.0 %ISO 527-1/-2拉伸模量2.60 GPa377 ksiISO 527-1/-2弯曲强度85.0 MPa12300 psiISO 178弯曲模量2.40 GPa348 ksiISO 178悬壁梁缺口冲击强度4.00 kJ/m21.90 ft-lb/in2ISO 180/1A简支梁无缺口冲击强度NBNBISO 179/1eUNB@Temperature -30.0 °CNB@Temperature -22.0 °FISO 179/1eU简支梁缺口冲击强度0.400 J/cm21.90 ft-lb/in2ISO 179/1eA0.400 J/cm2@Temperature -30.0 °C1.90 ft-lb/in2@Temperature -22.0 °FISO 179/1eA拉伸蠕变模量(1 hr)2600 MPa@Time 3600 sec377000 psi@Time 1.00 hourISO 899-1拉伸蠕变模量(1000 hr)1800 MPa@Time 3.60e+6 sec261000 psi@Time 1000 hourISO 899-1电气性能额定值 (公制)额定值 (英制)测试方法体积电阻率= 1.00e+15 ohm-cm= 1.00e+15 ohm-cmIEC 60093表面电阻1.00e+12 ohm1.00e+12 ohmIEC 60093介电强度26.0 kV/mm660 kV/inIEC 60243-1耗散因数0.0020@Frequency 100 Hz0.0020@Frequency 100 HzIEC 602500.020@Frequency 1.00e+6 Hz0.020@Frequency 1.00e+6 HzIEC 60250相比耐漏电起痕指数(CTI)600 V600 VIEC 60112热性能额定值 (公制)额定值 (英制)测试方法线形热膨胀系数 - 流动110 μm/m-°C61.1 μin/in-°FISO 11359-1/-2线性热膨胀系数,横向流动120 μm/m-°C66.7 μin/in-°FISO 11359-1/-2比热容2.11 J/g-°C0.504 BTU/lb-°F导热系数0.210 W/m-K1.46 BTU-in/hr-ft2-°Fof melt熔融温度225 °C437 °F10°C/min; ISO 11357-1/-3载荷下热变形温度(0.46 MPa)115 °C239 °FISO 75-1/-2180 °C356 °Fannealed; ISO 75-1/-2载荷下热变形温度(1.8 MPa)50.0 °C122 °FISO 75-1/-260.0 °C140 °Fannealed; ISO 75-1/-2维卡软化温度175 °C347 °F50°C/h 50N; ISO 306玻璃化转变温度，Tg55.0 °C131 °F10°C/min; ISO 11357-1/-2可燃性(UL94)HB@Thickness 1.50 mmHB@Thickness 0.0591 inIEC 60695-11-10HB@Thickness 0.800 mmHB@Thickness 0.0315 inIEC 60695-11-10极限氧指数22 %22 %ISO 4589-1/-2材料描述测试方法Delivery FormPellets部件标识代码PBTISO 11469加工Injection Moulding供货地区Asia PacificEuropeGlobalNear East/AfricaNorth AmericaSouth and Central America树脂识别PBT