耐化学POM S9243

耐化学POM S9243---POM copolymer, modified

Injection molding type, elastomer-containing; with higher impact

strength and slightly lower hardness, rigidity and chemical

resistance than the basic type HOSTAFORM C 9021

Reduced emission grade, Emission according to VDA 275 < 5 mg/kg

good weld strength.

Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness)

POM共聚物，改性

注塑型，含弹性体；影响更大

强度和略低的硬度、硬度和化学性质

电阻比基本型HOSTAFORM C 9021高

降低排放等级，根据VDA 275排放100 到 120°C
干燥时间3.0 到 4.0hr
建议的 大水分含量0.15%
料斗温度20.0 到 30.0°C
料筒后部温度170 到 180°C
料筒中部温度180 到 190°C
料筒前部温度190 到 200°C
射嘴温度190 到 200°C
加工（熔体）温度190 到 200°C
模具温度60.0 到 80.0°C
注塑压力60.0 到 120MPa
注射速度慢到中等