Elastollan耐磨TPU 1185 A---Elastollan ® TPU 1185 A>TPU< Shore hardness A: 87
Shore hardness D: 36
Tear strength: 70 KN/m
Compression set: 25%
Processing method: injection molding • extrusion molding • blow molding
Material property: hydrolysis resistance and abrasion resistance
Material characteristics: good wear resistance • good damping performance • high tensile strength • low tenderness • chemical resistance • anti microbial • polyether
Material usage: plug • hose • mining application • pipe • seal • sporting goods application • damping element • film • molded ear mark • cable sheath • terminal cable sheath
1185A
热塑性弹性体橡胶|TPU
德国巴斯夫
填充物:挤出
物性信息：
| 基本性能 | 额定值 | 单位 | 测试方法 |
|---|---|---|---|
| 密度 | 1.12 | g/cm | DIN 53479 |
| 机械性能 | 额定值 | 单位 | 测试方法 |
|---|---|---|---|
| 磨擦损耗 | 25 | mm | DIN 53516 |
| 抗拉模数 (300%) | 10 | N/mm | DIN 53504-S2 |
| 撕裂强度 | 70 | N/mm | DIN 53515 |
| 抗拉强度 | 45 | N/mm | DIN 53504-S2 |
| 凹凸冲击强度 (+23℃) | 不破裂 | KJ/m | DIN 53453 |
| 硬度 | 36 | Shore D | DIN 53505 |
| 断裂延伸率 | 600 | % | DIN 53504-S2 |
| 抗拉模数 (20%) | 2.5 | N/mm | DIN 53504-S2 |
| 室温压缩变形率 | 25 | % | DIN 53517 |
| 凹凸冲击强度 (-30℃) | 不破裂 | KJ/m | DIN 53453 |
| 断裂延伸率 (80℃水中21天) | 600 | % | DIN 53504-S2 |
| 压缩变形率 (70℃) | 45 | % | DIN 53517 |
| 抗拉强度 (80℃水中21天) | 32 | N/mm | DIN 53504-S2 |
| 抗拉模数 (100 ) | 6 | N/mm | DIN 53504-S2 |
| 硬度 | 87 | shoreA | DIN 53505 |