PC/ABS GN-5001TF(LG化学)聚合物、热塑性塑料、ABS聚合物、聚碳酸酯/ABS合金、非增强、聚碳酸酯（PC）乐金化学产品说明:LUPOY聚碳酸酯树脂具有优良的机械性能、高耐热性、高冲击强度和尺寸稳定性。
应用：汽车：汽车前端，仪表盘衬垫主面板（仪表板），下仪表盘衬垫，控制台盒，手套箱盖，车门，轮罩和盖，除霜器格栅，后视镜外壳电子电器：显示器外壳、传真外壳、笔记本电脑外壳、手机外壳、传真和复印机框架、光盘驱动器托盘和主机架、继电器箱、连接器、开关工业零件及家用电器：头盔、接线盒、电动工具外壳、工业线轴、配电箱、电动工具组件、齿轮和凸轮、水表外壳LG Chemical LUPOY GN-5001TF Halogen Free PC/ABS Alloy, High Flow, Flame RetardantPolymer,Thermoplastic,ABS Polymer,Polycarbonate/ABS Alloy, Unreinforced,Polycarbonate (PC)LG Chemical产品说明:Among the characteristics of LUPOY polycarbonate resins are excellent mechanical properties, high heat resistance, high impact strength, and dimensional stability.Applications:Automotive: Automotive front ends, cluster pad main panel (instrument panel), lower cluster pad main, console box, glove box cover, door, wheel cover and cap, defroster grill, back mirror housingElectrical and Electronic: Monitor housing, fax housing, notebook PC housing, cellular phone case, fax and copy machine frame, CD ROM drive tray and main frame, relay case, connector, switchIndustrial Parts and Household Appliance: Helmet, terminal box, electrical tool housing, industrial bobbin, distributing board box, power tool component, gears and cams, water meter housingInformation Provided by LG Chem热性能额定值 (公制)额定值 (英制)测试方法载荷下热变形温度(0.46 MPa)88.0 °C190 °FASTM D648可燃性(UL94)V-0@Thickness 1.50 mmV-0@Thickness 0.0591 inLG Chemical LUPOY GN-5001TF Halogen Free PC/ABS Alloy, High Flow, Flame Retardant 物性表物理性能额定值 (公制)额定值 (英制)测试方法比重1.18 g/cc1.18 g/ccASTM D792线性成型收缩率0.0040 cm/cm0.0040 in/inASTM D955线性成型收缩率，横向0.0060 cm/cm0.0060 in/inASTM D955熔体流动速率22 g/10 min@Load 2.16 kg, Temperature 250 °C22 g/10 min@Load 4.76 lb, Temperature 482 °F机械性能额定值 (公制)额定值 (英制)测试方法洛氏硬度（R 级）113113ASTM D785抗张强度(屈服)55.0 MPa7980 psiASTM D638伸长率 (断裂)50 %50 %ASTM D638弯曲强度79.0 MPa11500 psiASTM D790弯曲模量2.35 GPa341 ksiASTM D790悬壁梁缺口冲击强度3.90 J/cm@Temperature 23.0 °C7.31 ft-lb/in@Temperature 73.4 °FASTM D256加工性能额定值 (公制)额定值 (英制)测试方法料筒后部温度200 - 230 °C392 - 446 °F料筒中部温度210 - 240 °C410 - 464 °F料筒前部温度220 - 250 °C428 - 482 °F射嘴温度220 - 250 °C428 - 482 °F加工（熔体）温度230 - 260 °C446 - 500 °F模具温度50.0 - 80.0 °C122 - 176 °F干燥温度60.0 - 80.0 °C140 - 176 °F干燥时间4 - 6 hour4 - 6 hour螺杆转速40 - 70 rpm40 - 70 rpmPC/ABS GN-5001TF(LG化学)华东总代理商-浙江昌宏塑胶原料有限公司.