物性信息：
| 密度 | 1.14 g/cc | 0.0412 lb/in³ | DAM; ISO 1183 |
| 吸水率 | 8.5 % @Thickness 2.00 mm | 8.5 % @Thickness 0.0787 in | DAM; Sim. to ISO 62 |
| 水分吸收 | 2.70 % @Thickness 2.00 mm | 2.70 % @Thickness 0.0787 in | DAM; Sim. to ISO 62 |
| 粘度测试 | 300 cm³/g | 300 cm³/g | DAM; ISO 307 1157 1628 |
| 线性成型收缩率,Flow | 0.015 cm/cm | 0.015 in/in | DAM; ISO 294-4 2577 |
| 抗张强度(屈服) | 54.0 MPa | 7830 psi | 50%RH; ISO 527-1/-2 |
| 82.0 MPa | 11900 psi | DAM; ISO 527-1/-2 | |
| 伸长率 (断裂) | >= 50 % | >= 50 % | DAM; Nominal; ISO 527-1/-2 |
| >= 50 % | >= 50 % | 50%RH; Nominal; ISO 527-1/-2 | |
| 屈服伸长率 | 4.5 % | 4.5 % | DAM; ISO 527-1/-2 |
| 28 % | 28 % | 50%RH; ISO 527-1/-2 | |
| 拉伸模量 | 1.20 GPa | 174 ksi | 50%RH; ISO 527-1/-2 |
| 3.00 GPa | 435 ksi | DAM; ISO 527-1/-2 | |
| 简支梁无缺口冲击强度 | NB | NB | DAM; ISO 179/1eU |
| NB | NB | 50%RH; ISO 179/1eU | |
| NB @Temperature -30.0 °C | NB @Temperature -22.0 °F | DAM; ISO 179/1eU | |
| NB @Temperature -30.0 °C | NB @Temperature -22.0 °F | 50%RH; ISO 179/1eU | |
| 简支梁缺口冲击强度 | 0.700 J/cm² | 3.33 ft-lb/in² | DAM; ISO 179/1eA |
| 2.90 J/cm² | 13.8 ft-lb/in² | 50%RH; ISO 179/1eA | |
| 0.400 J/cm² @Temperature -30.0 °C | 1.90 ft-lb/in² @Temperature -22.0 °F | 50%RH; ISO 179/1eA | |
| 0.600 J/cm² @Temperature -30.0 °C | 2.86 ft-lb/in² @Temperature -22.0 °F | DAM; ISO 179/1eA |
| 线形热膨胀系数 - 流动 | 100 µm/m-°C | 55.6 µin/in-°F | DAM; ISO 11359-1/-2 |
| 线性热膨胀系数,横向流动 | 100 µm/m-°C | 55.6 µin/in-°F | DAM; ISO 11359-1/-2 |
| 熔融温度 | 263 °C | 505 °F | DAM; 10°C/min; ISO 11357-1/-3 |
| 载荷下热变形温度(0.46 MPa) | 205 °C | 401 °F | DAM; ISO 75-1/-2 |
| 载荷下热变形温度(1.8 MPa) | 74.0 °C | 165 °F | DAM; ISO 75-1/-2 |
| 维卡软化温度 | 245 °C | 473 °F | DAM; 50°C/h 50N; ISO 306 |
| Delivery Form | Pellets | |
| 加工 | Casting | |
| Coatable | ||
| Film Extrusion | ||
| Injection Moulding | ||
| Other Extrusion | ||
| Profile Extrusion | ||
| Sheet Extrusion | ||
| 供货地区 | Europe | |
| Near East/Africa | ||
| North America | ||
| South and Central America |