6XV1840-2AH10西门子以太网线

6XV1840-2AH10西门子以太网线

6XV1840-2AH10西门子以太网线

西门子触摸屏代理商，西门子一级代理商，西门子中国授权总代理

----浔之漫智控技术(上海)有限公司

   本公司经销合信/CO-TRUST科思创西门子PLC；S7-200S7-300 S7-400 S7-1200 触摸屏，变频器，6FC，6SNS120 V10 V60 V80伺服数控备件：原装进口电机，电线，电缆，希望能跟您有更多的合作机会

TeleControl Basic is based on SIMATIC S7-1200, ET 200SP as well as SIMATIC RTU3000C and secure transmission via mobile wireless or the Internet. It is particularly suitable wherever small data quantities have to be transmitted over wireless connections or via the Internet.

TeleControl Basic can be used as a low-cost fault signaling system, but thanks to the bidirectional communications facility, it is also suitable for simple telecontrol tasks for monitoring and control.

Depending on the performance level of the CPU in the substations, local automation tasks are handled in addition to communication.

Main applications are the monitoring and control of non-mobile stations in the following sectors:

Water and wastewater

Drinking water purification and distribution

Irrigation systems

Oil and gas supplies

District heating networks

Automatic machines

Traffic control systems

Building monitoring

Weather stations

Lighthouses

Wind farms

Photovoltaic plants

Environmental monitoring equipment

Intelligent advertising panels

In addition, TeleControl Basic can also be used to link mobile stations if central monitoring and/or control is required for these:

Railway vehicles

Special vehicles

Local public transport

Complex building machines

Ships on rivers and in coastal areas

Buoy tracking

Components:

CP 1243-7 LTE communications module
communications processor for LTE communication (EU and US) for setting up telecontrol stations of the type S7-1200

CP 1242-7 GPRS communications module
communications processor for GPRS and GSM communication for setting up telecontrol stations of the type S7-1200

CP 1243-1 communications module
communications processor for setting up telecontrol stations of the type S7-1200 for connection to the Internet using external routers, such as SCALANCE M812-1

CP 1542SP-1 IRC communications module
communications processor for setting up substations of the type ET 200SP for connection to the Internet using external routers e.g. SCALANCE M812-1

SIMATIC RTU3030C/RTU3031C and RTU3041C telecontrol station
Compact telecontrol station for energy self-sufficient applications for UMTS/3G communication or LTE-M/NB-IoT communication

SIMATIC RTU3010C telecontrol station
Compact telecontrol station for energy self-sufficient applications for connection to the Internet via an external router, e.g. SCALANCE M812-1

TeleControl Server Basic
software package consisting of:

OPC UA server software for the PC control center;
for data exchange with an OPC client, e.g. WinCC, PCS 7 or WinCC OA

Connection manager for the PC control center;
for establishing a secure telecontrol connection with the RTU for monitoring these connections and for data routing with direct data transmission between telecontrol stations

G_IK10_XX_30326

Communication options with TeleControl Basic

Process data communication

TeleControl Server Basic software enables the connection of up to 5 000 telecontrol stations to the control center via the OPC interface (OPC UA) using GPRS mobile wireless or Ethernet/internet.

TeleControl Server Basic is an OPC server software with special communication functions, which permit it to support connections to remote telecontrol substations. These PLCs are configured with the CP 1243-7 LTE, CP 1242-7 GPRS, CP 1243-1 (Ethernet), CP 1542SP-1 IRC (Ethernet), or they comprise the compact Remote Terminal Units of the RTU3000C family. Mobile wireless services or standard IP services via Ethernet are used for the connections.

Via the mobile wireless connections or Ethernet/internet, the remote TeleControl substations can communicate with the TeleControl Server Basic software or with other SIMATIC PLCs that are connected with TeleControl Server Basic

The PC on which TeleControl Server Basic is installed must be permanently accessible from the mobile wireless network. It must therefore be directly connected to the mobile wireless provider using a dedicated line, and permanently to the internet, e.g. via DSL.

For substations of the type S7-1200 and ET 200SP, the telecontrol functions are configured directly with STEP 7 Basic/Professional V14 (TIA Portal) or higher. The Remote Terminal Units of the RTU3000C family are configured via a web server (web-based management – WBM).

Alarms as text messages

The communications processors CP 1243-7 LTE, CP 1242-7 GPRS and the RTU3000C can receive and send messages directly as text messages. A cell phone or another PLC can be the communication partner.

Wake-up function

"Wake-up" of stations that change from standby mode to online mode for diagnostics purposes. The RTU3000C is woken up by its communication partner (e.g. TeleControl Server Basic) using a wake-up call or a wake-up SMS to establish the connection between them.

For security reasons, the communication partner must identify itself appropriately for the wake-up function, e.g. using the CLIP function.

Access to the telecontrol stations using teleservice

TeleControl Server Basic contains the teleservice function directly in the TIA Portal. This gives internationally active plant and machine manufacturers worldwide access to the SIMATIC telecontrol stations.