Product introduction - mine control cable MKVV mine control cable MKVVR mine control cable shielding control cable MKVV32 MKVVP mining mine control cable MKVVRP mine shielding control cable for mine control cable MKVV22 mine flame-retardant control cable for mine monitoring control cable for mine cable type MKVV, MKVV22, MKVV32, MKVVR, MKVVP, MKVVRP 1, mine control cable standards and specifications: MT818-1999-2, flame-retardant control cable for mine purposes: This product is suitable for the control and monitoring circuit with rated ac voltage u0/u of 450/750v or below and the connecting line of the protection circuit and the electrical instrument in the distribution device. 3. Model specifications and scope of mine control cable products: Model specifications of the control cable for mining use: MKVV,MKVVP, mkvvvvvvvvvvp2-10mm2,2-61 cores are applicable to the weak current control system or mkvvvv22 of the strong electromagnetic field interference area. MKVV20 0.5-10mm2,4-61 core mkvvv32, mkvvvvv30 0.5-10mm2,7-61 core MKVVR 0.5-6mm2,2-61 core MKVRP 0.5-4mm2,2-61 core mkvvvvvvp22, mkvp2-221.5-10mm2, 4-22 core mkvp2, 1.5-10mm2 Is mainly used for 500 kv substation and power distribution device and strong electromagnetic interference zone MKVV - 1, MKVV22 0.5 was 10-1, 4, 2-61 core features: coal mine with control cable conductor long-term allowed working temperature is 70 ℃, the cable temperature under installation should not below 0 ℃. Permissible bending radius of control cables used in coal mines: for cables with armored or copper band shielding structures, the bending radius should not be less than 12 times of the outer diameter of the cables. For soft cable with shield layer structure, it should be no less than 6 times the outer diameter of the cable. The cable without armor layer should not be less than 6 times the outer diameter of the cable.
特种电缆就是有特殊用途、可以在特定场合使用的电缆，比如可以耐高温，耐酸碱，防白蚁，以及在轮船飞机核电站等场合使用的电线电缆。
就分类来说，它与电力、控制、计算机电缆等类别不属于同一种分类方法，也就是上列电缆中也包含有特种电缆在内。
一般特种电缆都需要制定企业内控标准。
航空航天、机车车辆、能源、钢铁、有色金属冶炼、石油开采、电机、建设等领域需用耐高温电线电缆。
长期连续工作温度135度、180度、250度及
有强电与弱电之分，这里介绍一种强电用低感电缆。
此电缆带有热耗散装置，用于各类接触焊机、电弧焊机与气动焊钳间相连接的新型水冷式低感电缆，具有结构简单合理、冷却水流通量大、不会形成堵塞阻断和限流现象、散热效果好、使用寿命长等特点。
矿用信号电缆说明：MHYA32（PUYV39、PUYV39-1）矿用聚乙烯绝缘阻燃聚氯乙烯护套单层钢丝铠装井筒矿用信号电缆,用于斜井或竖井中作主信号电缆MHYVRP（PUYVRP）矿用聚乙烯绝缘阻燃聚氯乙烯护套铜丝编织屏蔽软矿用信号电缆用于井下平巷或斜巷作矿用信号电缆MHYVP（PUYVP）矿用聚乙。
MHYBV型弯曲半径不小于电缆直径的10倍。
MHYVP型弯曲半径不小于电缆直径的10倍。
MHY32型弯曲半径不小于电缆直径的15倍。
煤矿用控制电缆允许的弯曲半径：对有铠装或铜带屏蔽结构的电缆应不小于电缆外径的12倍。
举例说明它的用法。
1:MOVK5D0。
意思就是说把常数K5写入D0。
使D0＝K5。
上面说的常数K，H在程序执行中自动转化为二进制写入D0。
2:MoVk5k1y0]就是把5这个数转化为2进制、即是0101。
以二进制的数值控制组合位原件Y0到Y3的状态。
0为低电位、1为高电位体现在1组（k1）也就是4个输出口上、由y0开始也就是y3y2y1y0，对应0101则y0和y2输出。
y1和y3停止。
3:MOVK1X0K1Y0。
25-50V、电流在“梅花芯“轮心“辐条