耐高温F46计算机电缆属于电子计算机系统专用电缆之一，是现代化工业建设急需的配套产品，其广泛用于能源工业、冶金工业和石油化工业等厂矿企业和科研部门的电子计算机、仪器仪表、各种自动化检测设备和其它信息处理设备的信号传输和控制系统。
一般推荐如下： 普通双绞屏蔽型电缆 STP-120Ω（for RS485 CAN） one pair 20 AWG ，蓝色护套，电缆外径7.7mm左右。
适用于室内、管道及一般工业环境。
使用时，屏蔽层一端接地。
阻燃型产品在型号前加“XX—"，用阻燃“Z、ZR、ZA、ZB、ZC、ZRA、ZRB、ZRC、ZBN、ZCN、ZAN、ZN、ZRN"，低烟低卤阻烟“ZL、ZD、"，低烟无卤阻燃“ZW、ZDW、ZLW、ZWD、ZRD、ZRW",表示铠装型产品在产品的型号后下角加“—XX"，用钢带铠装“22、29"、细钢。
MHYAV (20 30 50) x2x0.8mhya322 implementation standard mt818.14-1999 4, conditions of use cable using the environment temperature - 40 ℃ ~ + 50; At 25 ℃ when the humidity is 95%; Cable laying temperature - 10 ℃ or higher; When laying the cable, the bending radius of MHYV is greater than 10 times of the cable outer diameter, and the other models are greater than 15 times of the cable outer diameter. Model: MHYAV, MHYA32, MHYV, MHYVR, MHYVRP, MHYVP, MHY, MHJY 6, product description: Model name called MHYV coal mine with polyethylene insulated PVC sheathed communication cable MHYVR coal mine with polyethylene insulated PVC sheathed communication soft cable MHYVP coal mine with polyethylene insulation weaving to PVC sheathed communication cable MHYVRP coal mine with polyethylene insulation weaving to PVC sheathed communication soft cable MHYAV coal mine with polyethylene insulation aluminum - polyethylene adhesive armor layer PVC sheathed communication cable MHYA32 coal mine with polyethylene insulation aluminum - polyethylene adhesive armor layer steel wire armoured MHY32 PVC sheathed communication cable Polyethylene insulated steel wire armored PVC sheathed communication cable for coal mine
KFF22，KFP1F，KFP2F22，应不小于电缆外径的12倍。
使用条件:电缆使用环境温度为－40℃～+50；在25℃时湿度为95%；电缆敷设温度≥－10℃；电缆敷设时的弯曲半径MHYV≥10倍电缆外径，其余型号≥15倍电缆外径。
从检测比较环节输出电压控制BGl对电容充电的快慢进行移相，移相后的脉冲经脉冲变J土器Bm加到脉冲分配环节。
脉冲分配环节：同步变压器的交流电压控制BGBG3（3Ax31B）轮流导通（每个导通半个周期）。
同步变压器的极性保证KGl承受正向电压时BG2导通，这样触发脉冲就通过BG2加到KGl控制极上，使得可控硅在承受反向电J土时不送入脉冲。
充磁和起励环节：由隔离二极管Z蓄电池限流电阻R、起励按钮QA组成。
HJYJVP2/SA成束阻燃型交联聚乙烯绝缘、聚氯乙烯护套、铜塑复合带绕包总屏蔽呼叫通信电缆。
BJYC3V32/SA成束阻燃型交联聚乙烯绝缘、聚氯乙烯护套、铝塑复合带绕包总屏蔽呼叫通信电缆。
KVVP铜芯聚氯乙烯绝缘和护套编织屏蔽控制电缆敷设在室内、电缆沟、管道等要求有屏蔽的固定场合。
6 kv and above cable joint: (1) installing a cable terminal head, must be stripped semiconductor electric shielding layer, operation shall not damage the insulation, should avoid mark uneven situation, when necessary use sand paper to grind; The shield end should be flat and the graphite layer (carbon particles) should be clean. (2) plastic cable end copper tape screened and armor must be good grounding, the short circuit also follow this principle, avoid unbalanced three-phase run ShiGang armoured end produce inductive electromotive force, and even "lighter" and sheath and other accidents. It is required to use my tinplate to braid copper wire for grounding lead. When connecting with the cable copper belt, it should be welded with chromium-iron tin. The shield of three-phase copper tape should be connected with ground wire respectively. Note that the shielded ground wire and steel armor ground wire should be separately drawn out and insulated from each other. The position of the welded ground wire should be as low as possible.
Summary: fire-resistant cable refers to the cable which can keep safe running for a certain time under the condition of flame burning. China's national standard GB12666.6 IEC331 (equivalent) will fire test points A, B two levels, A grade flame temperature of 950 ~ 1000 ℃, the duration for fire, 90 min, class B flame temperature of 750 ~ 800 ℃, for fire duration 90 min, during the whole test, the sample should be under the rated voltage value of the product. Fire-resistant cable is widely used in high-rise buildings, subway, underground street, large power stations and the important industrial and mining enterprises and other related to fire security and its lifesaving, for example, fire fighting equipment and emergency light guide emergency facilities such as power supply circuit and control circuit. Purpose: fireproof cables are widely used in high-rise buildings, subway, underground street, large power stations and the important industrial and mining enterprises and other related to fire security and its lifesaving, for example, fire fighting equipment and emergency light guide emergency facilities such as power supply circuit and control circuit.
4.工作电容：平均值522nF/km5.远端串音防卫度：150kHZ时指定组合的功率平均值大于69dB/km。
KVVP2铜芯聚氯乙烯绝缘和护套铜带屏蔽控制电缆。
KVVP3铜芯聚氯乙烯绝缘和护套铝塑复合带屏蔽控制电缆。
铝塑综合护套在缆芯包带外重叠纵包一层符合规定的双面铝塑复合带,铝带标称厚度为0.20mm.外护层53型电缆在无外护层电缆外纵包一层皱纹钢塑复合带,电缆外护层应符合GB2952.1及GB2952.24的规定。
Spin cassette XF5-273 communication cable transfer box, adopting advanced technology at home and abroad, in accordance with the international advanced standard production in the eighty s of cable wiring equipment, for the city, the town of telecommunication network backbone cable and wiring cable transfer. Features: 1. The connection jumper adopts rotary clamp-type connection and is sealed with silica gel on the metal clip, because it is not only reliable and durable, but also easy to operate and repair without stripping. 2. The wiring terminals in the handover box shall be arranged in 25 pairs as a basic unit, consistent with the basic units of the local telephone cables and marked with Numbers on the terminals to facilitate construction and maintenance. 3. The structure, arrangement and installation dimensions of the wiring modules are exactly the same as those of 3M products and can be used for each other. 4. The box body is treated by electrostatic spraying, beautiful and generous, with clear lines, good anti-corrosion and waterproof performance and long service life. Main technical parameters: the environment temperature: - 40 ℃ ~ + 65 ℃ atmospheric pressure: 70 ~ 106 kpa relative humidity: 95% or less is random ends and insulation resistance between terminals and ground > 5 x 104 Μ Ω. When connecting any two ends and any terminals and grounding to 1000V ac, there shall be no breakdown or flying arc in 1min. Contact resistance between wire and terminal < 5 x lO - 3 Ω.
交流电的过零点检测方案较多，目前较常见的也是我之前所使用的方案如所示：交流电光耦过零检测电路的电路可以检测到交流电经过零点的时间，它存在诸多的弊端，现列举如下：电阻消耗功率太大，发热较多。
220V交流电，按照有效值进行计算三个47K的电阻平均每个电阻的功率为220^2/(3*47k)/3=114.42mw。
对于0805的贴片电阻按照1/8w的功率计算，当前的消耗功率接近其额定功率，电阻发热大较大。
KVV32聚氯乙烯绝缘，细钢丝铠装聚氯乙烯护套控制电缆敷设在室内、电缆沟中、管道、竖井内及地下，能承受一定的拉力作用。
PYYPTYY聚乙烯绝缘乙烯护套铁路信号电缆。
PYAPTYA聚乙烯绝缘挡潮综合护套（铁路）信号电缆。
在一定条件下，也可用于传输2048kbit/s以上的数字信号。
适用于市内、近郊及局部地区架空/管道敷设线路中也可以直埋。
最高传输频率分别为30MHz与100MHz。
1、用途：本产品供交流额定电压500V或直流电压1000V及以下配电装置中电器，仪表接线之用。
电缆导体的最高工作温度为70℃短路时：电缆导体最高温度不超过160℃（持续时间不大于5S）电缆允许弯曲半径不小于15D注：D为电缆外径mm。
电缆敷设时温度不低于0℃阻燃类别分为A、B、C类。
注：可根据用户需要生产阻燃交联型控制电缆、电力电缆。
在阻燃型系列产品中，成功地应用了隔氧技术，不仅0.6/1KV的聚氯乙烯绝缘和交联聚乙烯绝缘阻燃电力电缆能达到GB/T12666.5《成束电力电缆燃烧试验方法》中A类，额定电压6/10KV及8.7/15KV交联聚乙烯阻燃电力电缆也能达到A类高阻燃要求且有较大裕度。