450/750 v polyvinyl chloride insulated control cable, applicable to dc and ac 50 hz, rated voltage 450/750 v power plants, power plants, factories, mines, ports and petrochemical enterprises such as long-distance control loop, as a connecting line between electrical instrumentation and automation instrumentation, phoresy all kinds of electric energy role, make the whole electric, reliable operation.
具有以下几点特点：1、产品能有效预防白蚁、鼠类对电缆的危害，性能可靠长久，无需其他辅助方法；2、电缆产品内无防蚁鼠电力电缆一、产品特点及用途本产品适用于在蚁鼠危害比较严重，且有绿色环保要求的场所，特别是埋地和管道敷设的电力系统输配线路。
主要生产，KVV,KVV22，KVV32，KVVR,KVVRP等全系类全塑控制电缆，ZR-KVV,ZRC-KVV,ZRA-KVV,ZR-KVV22，ZR-KVVP22，ZR-KVV32，ZR-KVVRP等全系类阻燃控制电缆KYJV,KYJV22，KYJV32，KYJVR,KYJVRP,ZRA-KYJ。
100对及以上的电缆加有1%的预备对。
缆芯包带：用聚脂薄膜带绕包。
屏蔽：用轧纹或不轧纹金属带纵包子缆芯包带之外，两边搭接。
屏蔽带表面涂敷的塑料薄膜与护层粘接电缆护套：黑色低密度聚乙烯。
电缆吊线：吊线为7股镀锌钢绞线，标称外径为6.2mm，4．8mm和3.6mm三种，其抗张强度分别不小于3000kg，1800kg，和1000kg吊线用热塑性涂料涂敷，以防钢丝锈蚀。
计算机电缆用途：本产品广泛地应用于发电、冶金、石油、化工、轻纺等部门的检测和控制用计算机系统或自动化装置、以及一般的工业计算机上。
使用特征：额定电压UO/U为300/500V。
允许工作温度不超过70℃，敷设温度不低于0℃，允许弯曲半径应不小于电缆外的12倍，软结构电缆应不小于电缆外的8倍，铜带屏蔽的电缆应于小于电缆外径的15倍。
L、C元件称为“惯性元件”，即电感中的电流、电容器两端的电压，都有一定的“电惯性”，不能突然变化。
充放电时间，不光与L、C的容量有关，还与充/放电电路中的电阻R有关。
“1UF电容它的充放电时间是多长？”，不讲电阻，就不能回答。
RC电路的时间常数：τ=RC充电时，uc=U×[1-e(-t/τ)]U是电源电压放电时，uc=Uo×e(-t/τ)Uo是放电前电容上电压RL电路的时间常数：τ=L/RLC电路接直流，i=Io[1-e(-t/τ)]Io是最终稳定电流LC电路的短路，i=Io×e(-t/τ)]Io是短路前L中电流设V0为电容上的初始电压值；V1为电容最终可充到或放到的电压值；Vt为t时刻电容上的电压值。
聚乙稀绝缘综合护套钢带铠装聚氯乙烯护套PTYA23PTYA22PTY23PTY22PTYAH23PZYA23PZYA22PZY23PZY220.8mm（1/1.0MM）4-61芯适用于交流额定电压500V或直流电压1000V及以下传输音频信号及固定敷设的铁路信号和集团自动化装配的控制线路，能传输铁路。
现在将一些错误的观念作出一些澄清。
1.485信号线可以和强电电源线一同走线。
在实际施工当中，由于走线都是通过管线走的，施工方有的时候为了图方便，直接将485信号线和电源线绑在一起，由于强电具有强烈的电磁信号对弱电进行干扰，从而导致485信号不稳定，导致通信不稳定。
2．电缆最高长期工作温度:阻燃聚氯乙烯绝缘及护套：70℃和105℃两种；交联聚乙烯绝缘：90℃；氟塑料绝缘和护套：200℃和260℃两种；氟塑料绝缘和105℃阻燃聚氯乙烯护套：105℃；无卤低烟阻燃聚烯烃绝缘和护套：70℃；无卤低烟阻燃聚烯烃绝缘和护套：90℃和125℃两种。
Class A system - any phase conductor of such A system can be separated from the system within 1min when it comes into contact with ground or ground conductors. B class system, the system includes only the single-phase earth fault short-time running conditions, earth fault time should be no more than 1 h, but in any case, the longest do not exceed 8 h, ground fault total duration of not more than 125 h every year; Class C systems -- systems that do not belong to class A and class B.
每个单位都采用规定色谱的扎带绕带100对及以上电缆加有1%的备用线对，但最多不超过10对；8.缆芯包带：缆芯外包覆非吸湿性、非吸油性的绝缘带；9.电缆屏蔽：用轧纹(或不轧纹)双面涂塑铝带纵包于缆芯包带之外，两边搭接粘合；10.电缆护套：黑色低密度、中密度或高密度聚乙烯；11.识别标记：电缆外表面打印。
型号规格以及使用范围序号型号名称主要使用范围1ia-KVPV铜芯聚氯乙烯绝缘及护套铜丝编织屏蔽本安用控制电缆聚氯乙烯绝缘复合屏蔽本安电缆具有良好的电性能和抗干拢性能，可用于高要求及强干扰场合。
举例说明它的用法。
1:MOVK5D0。
意思就是说把常数K5写入D0。
使D0＝K5。
上面说的常数K，H在程序执行中自动转化为二进制写入D0。
2:MoVk5k1y0]就是把5这个数转化为2进制、即是0101。
以二进制的数值控制组合位原件Y0到Y3的状态。
0为低电位、1为高电位体现在1组（k1）也就是4个输出口上、由y0开始也就是y3y2y1y0，对应0101则y0和y2输出。
y1和y3停止。
3:MOVK1X0K1Y0。
Main transmission cable MHYVP 2 * 2 * 2 * 7/0.52 performance: 1. + 20 ℃ dc resistance wire 7/0.28 or less 45 Ω 1/0.8 / Km 36.7 or less Ω/Km, 2. + 20 ℃ wire insulation resistance 3000 M or more Ω. Km3. The line capacitance (800 ~ 1000 hz) to work or less 0.06 uF/km4. The far end crosstalk attenuation (800 ~ 1000 hz) or 70 dB/km5. Inductance (800 ~ 1000 hz) 800 or less mH/km6 resistance ac power frequency voltage 1.5 KV / 403 to the characteristics of the main transmission cables MHYVP 2 x 2 x 7/0.52 by: Mhy MT818.14-1999 1/0.8 (20 30 x 2 x 2 x 2) 50 x 0.8 coal mine with insulating aluminum bonding layer of PVC sheathed communication cable used in deviated well and drift MHYV (1 1 x 2 x 2 x 2, 4, 5 x 2) x 7/0.28 coal mine by polyethylene insulated PVC sheathed communication cable for mine roadway inclined lane and electromechanical cavern MHJYV 4/0.28 wire + 3/0.28 steel wire 1 2 x 2 x 2 coal mine with strengthening core polyethylene insulated PVC sheathed mining communications cables used for mechanical damage is higher level and inclined lane MHYA32 (30 x 2, 50 x 2, 80 x 2) x 402 coal mine equipment introduction mining communication cable: purpose: this product is used for underground telephone communication welding line, distribution line and user line. Conditions of use: cable temperature - 40 ℃ ~ + 50; At 25 ℃ when the humidity is 95%; Cable laying temperature - 10 ℃ or higher; The bending radius of MHYV for cable laying is 10 or greater
Armored communication cable structure: 1. Basic cable: any filled and unfilled cable with single sheath or double sheath structure. 2. Armored communication cable mechanical protection layer: type 53 adopts 0.15mm thick corrugated steel belt, which is longitudinal wrapped on the basic cable and overlapped on both sides. The surface of the steel belt is coated with plastic to prevent corrosion and water intrusion. The type 23,22 has similar performance with double steel band wrapping. 3. Armored communication cable sheath: black high-molecular weight low-density polyethylene or polyvinyl chloride thin sheath. Sheath thickness may depend on the basic cable outer diameter. 4, identification and marking: cable appearance with permanent identification mark, tag, at no more than alternate 1 m intervals between 5, sheathed communication cable tag contents are: the diameter of wire, wire on the quantity, type of cable, length, factory name and year of manufacture. 6. Armored communication cable electrical characteristics: the cable meets all the electrical requirements of the basic cable. 7. Cable length: mechanically protected cable is manufactured according to the standard length of the corresponding basic cable
该条件均适用于U0和U值。
当用于直流系统时，该系统的标称电压应不大于电缆额定电压的1．5倍。
注：系统的工作电压允许长时间地超过该系统标称电压的10%。
如果电缆的额定电压至少等于该系统的标称电压，则电缆可在高于额定电压10%的工作电压下使用。
Solid insulated filled cables are suitable for urban and township telecommunication lines of local telecommunication networks and for special network lines connected to public networks. Mainly used for pipeline laying. The inner and outer surfaces of the cable core and the shield layer are filled with oil paste and poured to prevent water intrusion. The mechanical and electrical properties of the cable remain unchanged under conditions of 30~C - 60~C.