Physical Properties of PC Plastic Raw Materials for Mitsubishi Engineering in Japan

PC is a non crystalline engineering material with particularly good impact strength, thermal stability, glossiness, antibacterial properties, flame retardancy, and pollution resistance. The notched Izod impact strength of PC is very high, and the shrinkage rate is usually 0.1%~0.2%.

Chemical Properties of PC Plastic Raw Materials for Mitsubishi Engineering in Japan

PC has good mechanical properties, but poor flow characteristics, making the injection molding process of this material more difficult. When selecting PC materials of what quality, the final expectations of the product should be taken as the benchmark. If the plastic parts require high impact resistance, then use PC materials with low flow rates; On the contrary, PC materials with high flow rates can be used to optimize the injection molding process.

PC plastic raw material is a new type of thermoplastic, with a transparency of 90%, and is known as a transparent metal. It is rigid and has toughness, high impact strength, high dimensional stability, and a wide range of operating temperatures. It has good electrical insulation performance, heat resistance, and non-toxicity, and can be molded by injection or extrusion. PC plastic has excellent thermal properties and can be used for a long time between -100 ℃ and 130 ℃, with a embrittlement temperature below -100 ℃.