PC+ABS沙伯基础C6600/阻燃PC/ABS耐冲击

PC+ABS沙伯基础C6600/阻燃PC/ABS耐冲击

PC/ABS沙伯基础C6600：无卤阻燃PC+ABS，均衡流量+耐冲击和广泛的应用，包括企业设备，显示器，机箱，其中包括水解稳定性,

PC/ABS沙伯基础C6840树脂的可塑性，不含氯和非溴化阻燃系统阻燃的PC +ABS混合注射。主要功能包括非常良好的流动性，均衡的冲击性能，耐热性，水解稳定性

PC/ABS沙伯基础C8080REC，冲击改性,

PC/ABS沙伯基础C2951:是阻燃PC+ABS无氯化或溴化阻燃添加剂。高耐热性提供了苛刻的电气应用，同时保持良好的加工性能。

PC/ABS沙伯基础C3650：阻燃PC+ABS共混使用无溴无氯阻燃系统，提供高冲击和优良的挤压和热特性。

PC/ABS沙伯基础C4210HF：PC+ABS的10％GR。高流动性。高耐热性。优良的强度+刚性。良好的抗冲击+外观,

PC/ABS沙伯基础CE1821：高硬度PC+ABS共混提供高冲击，高耐热，低膨胀系数，良好的表面质量和优良的挤压和热特性。

PC/ABS沙伯基础CH6410是一个高温，冲击改性PC树脂，与无卤环保阻燃体系。

PC/ABS沙伯基础CM6140加阻燃剂，填充级PC+ABS，不含氯和非溴化FR系统

PC/ABS沙伯基础CM6210：高弹性模量阻燃PC+ABS的挤出和热成型应用，采用非溴化和非氯化FR系统.

华韵塑胶原材料长期供应 PC+ABS抗紫外线   PC+ABS高冲击   PC+ABS阻燃级   PC+ABS电镀级   PC+ABS耐水解   PC+ABS耐化学..

产品名称：沙伯基础创新塑料PC/ABS

产地：美国、沙特、西班牙、广州南沙、上海

加工性能：注塑成型

特性：高强度，高刚性，高抗冲击性，耐热性好，加工性好。

应用：电子电器部件、电器用品、汽车配件、家用货品、办公用品等。

华韵塑胶原材料长期供应 PC+ABS抗紫外线   PC+ABS高冲击   PC+ABS阻燃级   PC+ABS电镀级   PC+ABS耐水解   PC+ABS耐化学..华韵塑胶原材料长期供应 PC+ABS抗紫外线   PC+ABS高冲击   PC+ABS阻燃级   PC+ABS电镀级   PC+ABS耐水解   PC+ABS耐化学.

.4. The melt temperature can be measured by air-shot method, PC/ABS-H can be set at 215 °C (190 °c-230 °C) , PC/ABS-C can be set at 205 °C (190 °c-210 °C) . 6. The lower the back pressure, the better, generally not more than 200bar7, retention time if the equipment does not have melt retention point, pC/ABS-H can stay at 215 °C for 35 minutes. PC/ABS-C can stay at 205 °C for 20 minutes without serious decomposition. At injection temperature, melt can not stay in the barrel for more than 20 minutes. PC/ABS-C can stay for 7 minutes at 240 °C. If shutdown, barrel temperature can be reduced to 150 °C, if long-term shutdown must clean the barrel, turn off the heater. 8, stop cleaning machine barrel must use PE or PP, turn off the electric heating, push the screw in the front. The cylinder and screw must be kept clean. Impurities or dirt can change the overheat stability of PC/ABS (especially PC/ABS-h) . So when the use of halogenated polymers or other acidic polymers, the application of PE clean-up can play PC/ABS material, otherwise there will be an explosion. If the inappropriate role of pigments, lubricants or materials containing GF Nylon, will lead to degradation of plastic. 9, post-treatment for the use of parts at very high temperature and high quality requirements, to carry out heat treatment. The effect of annealing treatment, the product can be put into 30% hydrochloric acid solution for 30 minutes inspection, and then visual inspection to determine whether there is residual stress crack...PC/ABS本色阻燃    PC/ABS黑色阻燃  PC/ABS瓷白阻燃