支架长度/Length : | 120mm ~ 170mm | 重量/Weight : | 1120kg |
支架宽度/Width : | 48mm~ 75mm | 设备生产产地 : | 深圳 |
设备所在地 : | 深圳市沙井 | 新旧程度 : | 9.5成新 |
型号 : | GS100A |
(平面式高速固晶机)
(周期:60ms)
适用于2121,3014及2835,5050等
一、机型特性
1.采用国际领先的双固晶,双点胶,双晶片搜寻系统;
2.采用直驱电机驱动邦头;
3.采用线性电机驱动搜寻晶片平台(X/Y)与送料平台(B/C);
4.采用可程式恒温点胶系统;
5.采用真空漏晶检测;
6.支架采用叠片式上料(免装料盒),有效提高了生产效率;
7.工控机控制设备运行,简化了自动化设备的操作;
8.精准的自动化设备为企业提高生产效率,降低成本提供了有效保障,从而切实有效地提高了企业竞争力;
9.精准的固晶位置及优良的一致性为后道工序提供了先天的保障。
Cycle: 60ms
It is compatible with 2121、3014、2835 and 5050 etc.
Product Features
1. International leading double die bond, double adhesive dispense and double die searching system;
2. Linear motor is applied to drive bond head;
3. Linear motor will drive the die to search corresponding platform(X/Y) and corresponding loading platform (B/C);
4. Programmed control constant-temperature adhesive dispensing system is also applied;
5. Vacuum die missing testing technology is adopted;
6. Stacking holders for loading (free-loading magazine) is applied to improve the production efficiency largely;
7. IPC will control the operation of equipment, simplifying the operation of automation equipment;
8. Sophisticated equipment will help improve your enterprise’s production efficiency and reduce relevant costs so as to provide effective guarantee and enhance the enterprise’s competitiveness;
9. Precise die bond location and excellent compatibility will guarantee the back-end processing.
二、规格参数
Specifications and Parameters
1.系统功能/System Function | 4、吸晶摆臂机械手系统/Die Bonder’s Swing Arm-and-hand system | ||
生产周期 /Production Cycle | 50ms 周期取决于晶片尺寸及支架 (Depending On Die Size And Holder) | 吸晶摆臂/Swing Arm of Die Bonder | 90°可旋转固晶 (Rotatable Die Bond) |
XY位置精度/Accuracy | ±1mil(±0.025mm) | 吸晶压力/Die Bond Pressure | 可调20g—250g (Adjustable) |
芯片旋转/Die Rotation | ±3° | 5.送料工作平台/Loading Workbench | |
2.芯片XY工作台/Die XY Workbench | 行程范围/Range of Stroke | 170mm*75mm | |
芯片尺寸/Die Dimensions | 3mil×3mil-80mil×80mil | XY分辨率/XY Resolution | 0.02mil(0.5μm) |
6.适用支架尺寸/Suitable Holder’s Size | |||
晶片最大角度修正 /Max. Angle Correction | ±15°(选配)(Optional) | 支架长度/Length | 120mm ~ 170mm |
最大芯片环尺寸 /Max. Die Ring Size | 6″(152mm) 外径(External Diameter) | 支架宽度/Width | 48mm~ 75mm |
最大芯片面积尺寸/Max. Die Area | 4.7″(119mm)扩张后(Expanded) | 7.所需设施/Facilities Needed | |
分辨率/Resolution Ratio | 0.04mil (1μm) | 电压/频率/Voltage/Frequency | 220V AC±5%/50HZ |
顶针Z高度行程/Thimble Z Height Stroke | 80mil(2mm) | 压缩空气/Compressed Air | 0.5MPa(MIN) |
额定功率/Rated Power | 950W | ||
3.图像识别系统/Image Recognition System | 耗气量/Gas Consumption | 5L/min | |
灰阶度/Grey Scale | 256级灰度(Level Grey) | 8.体积及重量/Volume and Weight | |
分辨率/Resolution | 656×492像素(Pixels) | 长x宽x高/ Length x Width x Height | 135×89×180cm |
图像识别精准度 /Image Recognition Accuracy | ±0.025mil@50mil观测范围(Observation Range) | 重量/Weight | 1120kg
|