Machine model zjb-388a
Machine size 180mm * 125mm * 150mm (L * w * h)
Weight about 2500g
Service voltage AC100-240V
Machine Input Voltage DC12V / 1000mA
Use screw specification m1.0-m5.0 (screw length not more than 18mm)
Capacity 200-220c. C + 3%
Screw output speed 2 per second
DC power supply with accessories (input AC100-240V, output DC12V / 1000mA),
Slide fixture
Wide range of use: screw size can be 1.0 ~ 5.0mm (1.0, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6, 3.0, 3.5, 4.0, 5.0). This machine can adjust the size of the track at will. The track adjustment is easy to understand. It is suitable for the use of various metric or inch screws.
Characteristic:
1. Special screws can be used, such as 1 ~ 1 or 1 < 2 or super flat head (0.2mm) shape screws or super large pad screws and screws with spring pad washers.
2. Reduce inventory and reduce cost. One screw can adjust 11 specifications. Users can reduce equipment purchase cost. This machine has high reliability. It adopts roller chute hopper and linear vibration feeding track. Its structure is simple and reliable.
3. When the machine is running, the screws are scattered on the track and automatically transported forward. All screws that are not in the track will continue to enter the next cycle in the drum without screw jamming.
4. The size of vibration intensity can be adjusted. The size of vibration intensity can be adjusted with the user to improve the production speed. The feeding and vibration driving mode are independent, and the ideal stop time can be set freely. The rolling blanking time of the drum, the vibration time after the screw reaches the front end, and the speed of the screw running on the track are all adjusted by the PCB independently to match the operation time of the production line.
5. Various voltage options, 100 or 240V voltage input, enable the machine to be used anywhere in the world and ensure normal function.
机器型号 ZJB-388A
机器尺寸 180mm*125mm*150mm（长*宽*高）
重 量 约2500g
使用电压 AC100-240V
机器输入电压 DC12V/1000mA
使用螺丝规格 M1.0-M5.0 (螺丝长度不超过18mm)
容 量 200-220C.C+_3%
螺丝输出速度 每秒2粒
附带配件 直流电源(输入AC100-240V 输出DC12V/1000MA)，
滑轨治具片
使用范围广：螺丝尺寸可由1.0~5.0mm（1.0、1.2、1.4、1.7、2.0、2.3、2.6、3.0、3.5、4.0、5.0）多种规格。本机可任意调整轨道大小，轨道调整简单易懂，配合螺丝尺寸，适应各种公制或英制螺丝的使用需要。
特点：
1、可使用特殊螺丝，如1~1或1<2或超平头（0.2mm）形状之螺丝或超大代垫螺丝以及带弹垫垫片的螺丝。
2、减少库存降低成本，一台可调整11种规格使用的螺丝，使用者可降低设备采购成本。本机可靠性高，采用滚筒滑槽式料斗和直线振动式送料轨道，结构简单、可靠。
3、不卡螺丝，机器运转时，螺丝散落在轨道上，自动向前输送，凡是未进入轨道的螺丝都继续在滚筒内进入下个循环，无卡螺丝现象。
4、可调整震动强度的大小，震动强度大小可随使用者调整，提升生产速度。送料与震动驱动方式独立，可自由设定理想停止时间，滚筒滚动落料时间、螺丝到达前端后的震动时间、螺丝在轨道上运行的速度快慢皆由PCB独立提供调节线路从而配合生产线的作业时间。
5、多种电压选择，100或240v电压输入，使机器能在全世界任何地方使用且确保功能正常运作。