涂料方面，在涂料中加入5‰—3%的PTFE微粉，可以明显改善涂料黏性及润滑性，降低摩擦系数并提高耐磨性、耐腐蚀性、耐划伤性、耐涂鸦性并减少吸潮，改善涂料的喷射浇铸性能，提高临界膜厚度并改善其热成型性能等。
**涂料主要应用类别——粉末涂料、油性涂料、水性涂料。
油墨方面，在油墨中加入0.1%—3%的PTFE微粉，可以明显改善油墨的滑动性、表面光滑性、光泽、并使印刷产品耐摩擦，适用于快速打印机的需求，可以减少堵塞，还能有效地避免纸张黏结。
**油墨——胶版印刷、凹版印刷、柔性印刷、丝网印刷等。
石墨烯方面，添加聚四氟乙烯（PTFE）微粉后的石墨烯聚合物，除了拥有PTFE微粉(耐腐蚀、耐高（低）温、耐老化、高绝缘、高润滑，不黏附)和石墨烯（增韧、导电、散热效果）的优良特性外，还具有良好的防静电性能。
Chemours Teflon® PTFE 850A Granular Molding Powder
PTFE
Chemours
产品说明：
Teflon® PTFE white granular molding powders are ideal for molding many different end products and stock shapes. Excellent chemical resistance, electrical properties, high temperature performance, low temperature toughness, plus unique adhesion and flame resistance.
Teflon® PTFE granular molding powders are processed by compressing them into a desired shape and heating them at temperatures above their melting point to consolidate the powder.
Resin Characteristics: Improved free-flow pellets with high bulk density. Excellent handling resin. Uses: Automatic molding of small-to-medium-sized parts; lined pipes, valves, and fittings via isostatic molding; compression molding of sheets.
Typical properties for Teflon® PTFE Granular Resin:
Chemours was formed from former DuPont performance chemicals businesses, including DuPont Fluoroproducts, in 2015.
物性信息：
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | 2.16 g/cc | 2.16 g/cc | ASTM D4894 |
| 体积密度 | 0.900 g/cc | 0.0325 lb/in³ | ASTM D4894 |
| 吸水率 | <= 0.010 % | <= 0.010 % | 24 hours; ASTM D570 |
| 粒径 | 400 µm | 400 µm | ASTM D4894 |
| 线性成型收缩率 | 0.027 cm/cm | 0.027 in/in | at preform pressure of 35 Mpa; ASTM D4894 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 洛氏硬度（R 级） | 58 | 58 | ASTM D785 |
| 肖氏硬度 (邵氏 A) | 98 | 98 | ASTM D2240 |
| 肖氏硬度 (邵氏 D) | 50 - 65 | 50 - 65 | ASTM D2240 |
| 极限抗拉强度 | 28.0 MPa | 4060 psi | ASTM D4894 |
| 伸长率 (断裂) | 300 % | 300 % | ASTM D4894 |
| 弯曲模量 | 0.496 GPa | 71.9 ksi | ASTM D790 |
| 泊松比 | 0.46 | 0.46 | approaches a limit of 0.50 at higher temperature |
| 悬壁梁缺口冲击强度 | 1.89 J/cm | 3.54 ft-lb/in | ASTM D256 |
| 摩擦系数 | 0.050 - 0.10 | 0.050 - 0.10 | ASTM D 1894 |
| 动态摩擦系数 | 0.10 | 0.10 | V = 10 fpm; P= 800 - 1000 psi |
| 0.13 | 0.13 | V = 100 fpm; P= 80 - 100 psi | |
| 静态摩擦系数 | 0.050 - 0.080 | 0.050 - 0.080 | 500 psi |
| K (wear) Factor | 5040 x 10-8 mm³/N-M | 2500 x 10-10 in³-min/ft-lb-hr | unlubricated vs. soft carbon steel |
| Limiting Pressure Velocity | 0.0420 MPa-m/sec @Temperature 21.0 - 27.0 °C | 1200 psi-ft/min @Temperature 69.8 - 80.6 °F | at 10 fpm |
| 0.0631 MPa-m/sec @Temperature 21.0 - 27.0 °C | 1800 psi-ft/min @Temperature 69.8 - 80.6 °F | at 100 fpm | |
| 0.0876 MPa-m/sec @Temperature 21.0 - 27.0 °C | 2500 psi-ft/min @Temperature 69.8 - 80.6 °F | at 1000 fpm | |
| 泰伯磨损，毫克/1000次 | 8.9 | 8.9 | 1000 cycles; CS-17F wheel |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | >= 1.00e+18 ohm-cm | >= 1.00e+18 ohm-cm | ASTM D257 |
| 表面电阻率 | >= 1.00e+18 ohm | >= 1.00e+18 ohm | ASTM D257 |
| 介电常数 | 2.1 @Frequency 1e+6 Hz | 2.1 @Frequency 1e+6 Hz | ASTM D150 |
| 介电强度 | 18.0 kV/mm | 457 kV/in | 100 micrometers film; ASTM D149 |
| 耗散因数 | <= 0.00010 @Frequency 1e+6 Hz | <= 0.00010 @Frequency 1e+6 Hz | ASTM D150 |
| 耐电弧性 | >= 300 sec | >= 300 sec | ASTM D495 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线性热膨胀系数 | 112 µm/m-°C @Temperature -100 - 25.0 °C | 62.2 µin/in-°F @Temperature -148 - 77.0 °F | |
| 124 µm/m-°C @Temperature 25.0 - 100 °C | 68.9 µin/in-°F @Temperature 77.0 - 212 °F | ||
| 220 µm/m-°C @Temperature 25.0 - 300 °C | 122 µin/in-°F @Temperature 77.0 - 572 °F | ||
| 790 µm/m-°C @Temperature 20.0 - 25.0 °C | 439 µin/in-°F @Temperature 68.0 - 77.0 °F | Large volume change in the 18-25°C transition range | |
| 比热容 | 1.20 J/g-°C @Temperature 40.0 °C | 0.287 BTU/lb-°F @Temperature 104 °F | |
| 1.30 J/g-°C @Temperature 150 °C | 0.311 BTU/lb-°F @Temperature 302 °F | ||
| 1.40 J/g-°C @Temperature 20.0 °C | 0.335 BTU/lb-°F @Temperature 68.0 °F | ||
| 1.50 J/g-°C @Temperature 260 °C | 0.359 BTU/lb-°F @Temperature 500 °F | ||
| 导热系数 | 0.250 W/m-K | 1.74 BTU-in/hr-ft²-°F | |
| 0.300 W/m-K @Temperature 20.0 - 260 °C | 2.08 BTU-in/hr-ft²-°F @Temperature 68.0 - 500 °F | ||
| 熔融温度 | 317 - 337 °C | 603 - 639 °F | ASTM D4894 |
| 高工作温度, Air | 260 °C | 500 °F | retains useful mechanical properties |
| 低工作温度, Air | -268 °C | -450 °F | retains useful mechanical properties |
| -79.0 °C | -110 °F | remains highly flexible | |
| 可燃性(UL94) | V-0 | V-0 | |
| 极限氧指数 | >= 95 % | >= 95 % | ASTM D2863 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | 379 - 429 °C | 714 - 804 °F | Cure Temperature |
| 材料描述 | 测试方法 | |
|---|---|---|
| 20% Hydrochloric Acid Transmission, g/100sq in. | <0.01 | |
| 50% Sodium Hydroxide Transmission, g/100sq in. | <.01 | |
| Acetic Acid Transmission, g/100sq in. | 0.41 | |
| Acetone Transmission, g/100sq in. | 0.95 | |
| Acetophenone Transmission, g/100sq in. | 0.5 | |
| Benzene Transmission, g/100sq in. | 0.64 | |
| Carbon Tetrachloride Transmission, g/100sq in. | 0.31 | |
| Chemical/Solvent Resistance | Excellent | |
| Detergent Resist. on grit-blasted aluminum, Hours | 624 | |
| Detergent Resistance on aluminum, Hours | 264 | |
| Detergent Resistance on grit-blasted steel, Hours | 24 | |
| Ethyl Acetate Transmission, g/100sq in. | 0.76 | |
| Folding Endurance, # cycles, .18-.20 mm | >10^6 | |
| Heat of Combustion J/g | 5100 | ASTM D240 |
| Hexane Transmission, g/100sq in. | 0.56 | |
| Piperidine Transmission, g/100sq in. | 0.04 | |
| powder flow ASTM D1855 (modified), g/min | 450 | |
| Red Fuming Nitric Acid Transmission, g/100sq in. | 7.5-1.4 | |
| Salt Spray Resistance on aluminum, Hours | >744 | |
| Salt Spray Resistance on steel, Hours | 192 | |
| Sulfuric Acid Transmission, g/100sq in. | 0.00001 | |
| Water Transmission, g/100sq in. | 0.4 | |
| Weather Resistance | 20 | Years unaffected in Florida Exposure |