Solvay Specialty Polymers Hyflon® PFA P450 Perfluoroalkoxy (PFA)
PFA
Solvay Specialty Polymers
产品说明：
Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, inherent flame resistance, low surface energy, and exceptional dielectric properties. Hyflon® PFA resins have been designed to retain their properties over a wide range of temperatures from cryogenic to 250-260°C (482-500°F) and are the material of choice in applications such as linings in the Chemical Process Industry, specialty cables, semiconductor industry, aerospace, and other challenging industries. Hyflon® PFA P450 is a medium molecular weight, high melt flow rate multi purpose resin designed for cable extrusion and injection molding. Hyflon® PFA P450 has obtained UL758 recognition for continuous use at 260°C (500°F) and is an ASTM D3307 - Type I resin.
Features: Flame Retardant; High Flow; High Heat Resistance; Medium Molecular Weight; Semi Crystalline
Uses: Aerospace Applications; Cable Jacketing; Liners; Semiconductor Molding Compounds
Additional Properties: Crystallization Heat - DSC 25.0 to 35.0 J/g; Flex Life - ASTM D2176 (300.0 µm): 4.0E+3 to 6.0E+3 Cycles; Heat of Fusion - DSC 25.0 to 35.0 J/g
Information provided by Solvay Specialty Polymers.
物性信息：
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 2.13 - 2.18 g/cc | 0.0770 - 0.0788 lb/in³ | ASTM D792 |
| 熔体流动速率 | 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C | 10 - 17 g/10 min @Load 11.0 lb, Temperature 702 °F | ASTM D1238 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 D) | 55 - 60 | 55 - 60 | ASTM D2240 |
| 抗张强度(断裂) | >= 21.0 MPa | >= 3050 psi | ASTM D638 |
| 伸长率 (断裂) | >= 280 % | >= 280 % | ASTM D638 |
| 拉伸模量 | 0.500 - 0.600 GPa | 72.5 - 87.0 ksi | 1.0 mm/min; ASTM D638 |
| 悬壁梁缺口冲击强度 | NB | NB | ASTM D256 |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | >= 1.00e+17 ohm-cm | >= 1.00e+17 ohm-cm | ASTM D257 |
| 表面电阻 | >= 1.00e+17 ohm | >= 1.00e+17 ohm | ASTM D257 |
| 介电常数 | 2.1 @Frequency 100000 Hz | 2.1 @Frequency 100000 Hz | ASTM D150 |
| 2.1 @Frequency 50.0 Hz | 2.1 @Frequency 50.0 Hz | ASTM D150 | |
| 介电强度 | 35.0 - 40.0 kV/mm | 889 - 1020 kV/in | ASTM D149 |
| 耗散因数 | <= 0.00050 @Frequency 100000 Hz | <= 0.00050 @Frequency 100000 Hz | ASTM D150 |
| <= 0.00050 @Frequency 50.0 Hz | <= 0.00050 @Frequency 50.0 Hz | ASTM D150 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 120 - 200 µm/m-°C | 66.7 - 111 µin/in-°F | |
| 比热容 | 0.900 - 1.10 J/g-°C | 0.215 - 0.263 BTU/lb-°F | ASTM C351 |
| 导热系数 | 0.200 W/m-K @Temperature 40.0 °C | 1.39 BTU-in/hr-ft²-°F @Temperature 104 °F | ASTM C177 |
| 熔融温度 | 300 - 310 °C | 572 - 590 °F | DSC |
| Crystallization Temperature | 275 - 285 °C | 527 - 545 °F | Peak; ASTM D3418 |
| 高工作温度, Air | 260 °C | 500 °F | Continuous Use |
| 可燃性(UL94) | V-0 | V-0 | |
| 极限氧指数 | 95 % | 95 % | ASTM D2863 |
| 材料描述 | 测试方法 | |
|---|---|---|
| 机构评级 | ASTM D 3307 Type I; UL 758 | |
| 可用性 | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| Latin America | ||
| North America | ||
| 形式 | Pellets | |
| 加工技术 | Extrusion; Injection Molding |
高温电线、电缆绝缘层，防腐设备、密封材料、泵阀衬套，和化学容器。
成型性能 1.结晶料,吸湿小。可采用通常得热塑性塑料得加工方法加工成制品。
3、流动性差，极易分解，分解时产生腐蚀气体。宜严格控制成型温度不要超过475度，模具应加热至150-200度，浇注系统对料流阻力应小。
4、半透明粒料，注塑、挤出成型。成型温度350-400度，475度以上容易引起变色或发生气泡。并注意脱模会较困难。
5、因熔融的材料对金属有腐蚀作用，长期生产，模具需要电镀铬处理。
PFA FEP PTFE 的化学性能相似，但FEP只能在200度以下使用，PTFE不能注塑。
氟塑料苏威PFA P450 高结晶（HCPP）正牌料