供应 斯洛伐克Plastcom SLOVAMID 66 BT TS PA66 热温定性

Plastcom SLOVAMID 66 BT TS PA66, basic type, thermal stabilityNylon 66, Heat StabilizedPlastcom spol. s r.o.产品说明：FeaturesModified for general use, with excellent manufacturing properties, characterized by high strength and toughness also at minus temperatures. Used in automotive, electrical, engineering and consumer goods industry. Application: electric tools, gear wheels, clamps, fasteners, toolbodies, webbing slings for cable harnesses.Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.000 kg palette, in paper octabins with a thick PE foil fixed on a 1.000 kg palette or in other packaging according to customer requirements. The transport is provided in closed-up vehicles where the material is protected against movement and mechanical damage. The product requires stocking in closed-up, dry places protected against sun and thermal radiation.Information Provided by Plastcom spol. s r.o.物性信息：物理性能额定值 (公制)额定值 (英制)测试方法密度1.13 g/cc0.0408 lb/in³粘度测量1.8 - 1.931.8 - 1.93线性成型收缩率0.018 cm/cm0.018 in/in线性成型收缩率，横向0.0193 cm/cm0.0193 in/in熔体流动速率4.0 g/10 min@Load 0.325 kg, Temperature 270 °C4.0 g/10 min@Load 0.716 lb, Temperature 518 °F机械性能额定值 (公制)额定值 (英制)测试方法抗张强度(断裂)80.0 MPa11600 psi伸长率 (断裂)3.0 %3.0 %拉伸模量3.20 GPa464 ksi弯曲强度100 MPa14500 psi弯曲模量2.70 GPa392 ksi简支梁无缺口冲击强度NB@Temperature 23.0 °CNB@Temperature 73.4 °FNB@Temperature -20.0 °CNB@Temperature -4.00 °F简支梁缺口冲击强度0.200 J/cm²@Temperature -20.0 °C0.952 ft-lb/in²@Temperature -4.00 °F0.500 J/cm²@Temperature 23.0 °C2.38 ft-lb/in²@Temperature 73.4 °F电气性能额定值 (公制)额定值 (英制)测试方法体积电阻率1.00e+12 ohm-cm1.00e+12 ohm-cm表面电阻1.00e+14 ohm1.00e+14 ohm介电强度30.0 kV/mm762 kV/in相比耐漏电起痕指数(CTI)600 V600 V热性能额定值 (公制)额定值 (英制)测试方法熔融温度260 °C500 °F载荷下热变形温度(1.8 MPa)68.0 °C154 °F维卡软化温度250 °C482 °FB可燃性(UL94)HBHB灼热丝试验960 °C1760 °F加工性能额定值 (公制)额定值 (英制)测试方法加工（熔体）温度280 - 300 °C536 - 572 °F模具温度80.0 - 90.0 °C176 - 194 °F干燥温度80.0 °C176 °F干燥时间4 hour4 hour水分含量0.15 %0.15 %注射压力70.0 - 120 MPa10200 - 17400 psi