比利时索尔维 TECHNYL B 216 BLACK 3N PA66/6 脱模性能良好

供应 比利时索尔维 TECHNYL B 216 BLACK 3N PA66/6 TECHNYL® B 216 BLACK 3NPolyamide 66/6 CopolymerSolvay Engineering Plastics产品说明：TECHNYL® B 216 Black 3N is an unreinforced copolyamide 66/6, medium viscosity, for injection moulding. This grade offers an excellent combination between impact resistance, rigidity, thermal resistance and surface appearance.物性信息：基本信息黄卡编号E44716-235606特性良好的流动性脱模性能良好优良外观用途工业应用汽车领域的应用通用消费品应用领域机构评级EC 1907/2006 (REACH)RoHS 合规性RoHS 合规外观黑色灰色自然色形式粒子加工方法注射成型树脂ID (ISO 1043)PA66/6物理性能干燥调节后的单位制测试方法密度1.14--g/cm³ISO 1183/A吸水率 (23°C, 24 hr)1.6--%ISO 62机械性能干燥调节后的单位制测试方法拉伸模量 (23°C)30001100MPaISO 527-2/1A拉伸应力ISO 527-2/1A     屈服, 23°C85.050.0MPaISO 527-2/1A     断裂, 23°C75.060.0MPaISO 527-2/1A拉伸应变ISO 527-2     屈服, 23°C3.625%ISO 527-2     断裂, 23°C30--%ISO 527-2弯曲模量 (23°C)30001200MPaISO 178弯曲应力 (23°C)12550.0MPaISO 178冲击性能干燥调节后的单位制测试方法简支梁缺口冲击强度 (23°C)5.016kJ/m²ISO 179/1eA简支梁无缺口冲击强度 (23°C)无断裂--ISO 179/1eU悬壁梁缺口冲击强度 (23°C)5.016kJ/m²ISO 180热性能干燥调节后的单位制测试方法热变形温度 (1.8 MPa, 未退火)67.0--°CISO 75-2/Af熔融温度242--°CISO 11357-3电气性能干燥调节后的单位制测试方法表面电阻率1.0E+151.0E+14ohmsIEC 60093体积电阻率1.0E+151.0E+15ohms·cmIEC 60093介电强度 (2.00 mm)2624kV/mmIEC 60243-1相对电容率3.003.20IEC 60250耗散因数0.0300.10IEC 60250漏电起痕指数IEC 60112     解决方案 A600600VIEC 60112     解决方案 B575--VIEC 60112可燃性干燥调节后的单位制测试方法UL 阻燃等级UL 94     1.6 mmHB--UL 94     3.2 mmV-2--UL 94极限氧指数24--%ISO 4589-2注射干燥单位制干燥温度80°C建议的最大水分含量0.20%料筒后部温度250 到 260°C料筒中部温度255 到 265°C料筒前部温度265 到 275°C模具温度60 到 80°C注射说明The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design