TPU S95A 巴斯夫TPU--Recommended for injection molding. Elastollan S series of products are polyester-based thermoplastic polyurethanes that exhibit good hydrolytic stability. They also exhibit good oil, fuel and solvent resistance. These products can be injection and blow molded and extruded.
As with all TPU products this grade must be dried prior to processing.
Property values below are typical values based on test samples cured 20 hours at 100°C before testing
TPU S95A>TPU< 邵氏硬度A: 96 邵氏硬度D: 46 撕裂强度: 120 KN/m 压缩形变: 25 % 材料特性: 良好的耐磨性 • 良好的阻尼性能 • 回弹性好 • 良好的抗撕裂强度 • 高拉伸强度 • 有弹性 • 耐化学性 • 聚酯基材料用途: 管材 • 滚轮轮胎 • 运动鞋底 • 鞋类
TPU S95A物性信息：
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.23 g/cc | 0.0444 lb/in³ | ASTM D792 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 A) | 96 | 96 | ASTM D2240 |
| 肖氏硬度 (邵氏 D) | 48 | 48 | ASTM D2240 |
| 极限抗拉强度 | 42.0 MPa | 6090 psi | ASTM D412 |
| 抗张强度(屈服) | 14.0 MPa @Strain 100 % | 2030 psi @Strain 100 % | ASTM D-412 |
| 26.0 MPa @Strain 300 % | 3770 psi @Strain 300 % | ASTM D-412 | |
| 伸长率 (断裂) | 510 % | 510 % | ASTM D412 |
| 撕裂强度 | 150 kN/m | 856 pli | ASTM D624 |
| 泰伯磨损，毫克/1000次 | 50 | 50 | H-18 wheel; ASTM D-1044. |
| Tensile Set | 90 % | 90 % | at break; ASTM D-412 |