| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 基本性能 | 吸水率 | 23℃水中24h | ASTM D-570 | 0.13 | % |
| 物理性能 | 比重 | --- | ASTM D-792 | 1.33 | --- |
| 螺线流动长度 | 3mm厚 | 出光法 | 0.13 | cm | |
| 机械性能 | 引张破坏强度 | --- | ISO R-527 (ASTM D-638) | 100(1000) | MPa(KG/cm2) |
| 引张弹性率 | --- | ISO R-527 (ASTM D-638) | 5700(58000) | MPa(KG/cm2) | |
| 引张破坏伸率 | --- | ISO R-527 (ASTM D-638) | 4 | % | |
| 挠曲强度 | --- | ISO 178 (ASTM D-790) | 140(1400) | MPa | |
| 挠曲弹性率 | --- | ISO 178 (ASTM D-790) | 5880(60000) | MPa(KG/cm2) | |
| IZOD冲击强度 | 4mm with notch 3.2mm with notch | ISO 180 (ASTM D-256) | 13(14) | KJ/m2(kgfcm/cm2) | |
| 洛氏硬度 | --- | ISO 2039-2 (ASTM D-785) | M91 | --- | |
| 电气性能 | 绝缘破坏电压 | 1.6mm厚 | ASTM D-149 | ＜22 | kv/mm |
| 体积固有抵抗 | --- | ASTM D-257 | ＜1010 | Ω?cm | |
| 诱电率 | 60Hz | ASTM D-150 | 3.25 | --- | |
| 诱电率 | 106Hz | ASTM D-150 | 3.25 | --- | |
| 诱电正接 | 60Hz | ASTM D-150 | 8×10-4 | --- | |
| 诱电正接 | 106Hz | ASTM D-150 | 9×10-3 | --- | |
| 耐电弧性 | --- | ASTM D-495 | 110 | Sec | |
| 加工性能 | 成型收缩率MDTD | --- | ASTM D-955ASTM D-955 | 2.06.0 | --- |
| 热 性 能 | 线膨胀系数 | --- | ASTM D-696 | 2.5 | ×10-5cm/cm/℃ |
| 燃烧性 | 1.47mm厚 | UL 94 | V-2 | --- | |
| 负荷挠曲温度 | 1.80MPa,18.6kg/cm2 | ISO 75(ASTM D-648) | 139 | ℃ | |
| 维卡软化点 | --- | ISO 306 | 150 | ℃ | |
