GENERAL DEscriptION
The SGM8747 is a single, high speed, low power comparator, which features a fast 155ns propagation delay. The device is optimized for low voltage operation on 3V or 5V supply, and consumes only 22μA supply current.
The SGM8747 supports rail-to-rail input and output operation. The input common mode voltage range is from -0.1V to (+VS) + 0.1V, and the output voltage swing is within 0.2V of the rails without external pull-up or pull-down resistor. The device can be compatible with CMOS and TTL logics. Any input or output pin has a continuous short-circuit protection to both power supply rails. The SGM8747 has an internal hysteresis for reducing comparator sensitivity to noise, even when the input signals move slowly.
The SGM8747 is available in Green SOT-23-5 and SC70-5 packages. It is rated over the -40℃ to +85℃ temperature range.
FEATURES
High Speed: 155ns Propagation Delay (10mV Overdrive)
Low Supply Current: 22μA (TYP) at VS = 3V
Low Offset Voltage: 0.8mV (TYP)
Rail-to-Rail Input and Output
Supply Voltage Range: 2.7V to 5.5V
Optimized for 3V and 5V Applications
Output Swing to within 190mV from Rails with 4mA Output Current
Supports CMOS or TTL Logic
Internal Hysteresis for Reducing Comparator Sensitivity to Noise
-40℃ to +85℃ Operating Temperature Range
Available in Green SOT-23-5 and SC70-5 Packages
APPLICATIONS
3V or 5V Applications
Portable/Battery-Powered Equipment
Mobile Phones
Zero-Crossing Detectors
Threshold Detectors
Line Receiver Units