KOPEL TPEE KP3363韩国可隆----KOPEL® is a thermoplastic polyester elastomer which is a new engineering rubber having combined properties of conventional rubber and thermoplastic. Its flexibility and elastic recovery are very similar to rubber, but its processability is much superior to rubber. While its flexibility and elastic recovery are similar to rubber, its mechanical properties-heat resistance, weather resistance and UV stability-are far greater than the performance of rubber.
Excellent flexibility and creep resistance, good mechanical properties and heat stability, good chemical resistance
Information provided by US distributor, API-Kolon.
KOPEL® TPC-ET KP3363>TPC-ET<
邵氏硬度D: 63
熔融温度: 213 °C
加工方式: 注射成型
符合规定: UL
材料特性: 通用级 • 中等刚性
材料用途: 通用 • 汽车领域的应用
TPEE KP3363物性信息：
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.23 g/cc | 0.0444 lb/in³ | DIN 53479; ASTM D792 |
| 吸水率 | 0.30 % | 0.30 % | DIN 53475; ASTM D570 |
| 线性成型收缩率 | 0.013 - 0.015 cm/cm | 0.013 - 0.015 in/in | ASTM D955 |
| 熔体流动速率 | 20 g/10 min @Temperature 230 °C | 20 g/10 min @Temperature 446 °F | ASTM D1238 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 肖氏硬度 (邵氏 D) | 65 | 65 | DIN 53505; ASTM D2240 |
| 极限抗拉强度 | 37.3 MPa | 5400 psi | DIN 53455; ASTM D638 |
| 伸长率 (断裂) | 550 % | 550 % | DIN 53455; ASTM D638 |
| 弯曲强度 | 294 MPa | 42700 psi | DIN 53455; ASTM D790 |
| Resilience | 43 | 43 | |
| 悬壁梁缺口冲击强度 | 0.824 J/cm | 1.54 ft-lb/in | Low Temp |
| NB | NB | DIN 53453; ASTM D256 | |
| 泰伯磨损，毫克/1000次 | 7.0 | 7.0 | CS-17 WHEEL; ASTM D1044 |